Kyocera FS-1020D manual Paper Size, Smoothness, Basis Weight

Page 50

Selecting the Right Paper

Paper Size

Cassettes and an MP tray are available for the paper sizes listed in Table 4-2. The dimensional tolerances are ±0.7 mm (±0.0276 inches) for the length and width. The angle at the corners must be 90° ±0.2°.

Multi-Purpose tray

Size

Cassette or multi-purpose tray

Size

Monarch

3-7/8 × 7-1/2 inches

Legal (Not available with the MP

8-1/2 × 14 inches

 

 

tray)

 

Business

4-1/8 × 9-1/2 inches

 

 

 

 

 

 

 

ISO DL

11 × 22 cm

Letter

8-1/2 × 11 inches

 

 

 

 

ISO C5

16.2 × 22.9 cm

ISO A4

210 × 297 mm

 

 

 

 

ISO B5

17.6 × 25 cm

ISO A5

148 × 210 mm

 

 

 

 

Executive

7-1/4 × 10-1/2 inches

JIS B5

182 × 257 mm

 

 

 

 

Commercial 9

3-7/8 × 8-7/8 inches

Custom

Cassette:

 

 

 

148 to 216 mm × 210 to 297

Commercial 6-3/4

3-5/8 × 6-1/2 inches

 

 

mm, and Legal

 

 

 

ISO A6

105 × 148 mm

 

 

(5-13/16 to 8-1/2 inches ×

 

 

 

JIS B6

128 × 182 mm

 

8-1/4 to 11-11/16 inches)

 

 

 

 

Oficio II

8-1/2 × 13 inches

 

MP tray:

 

 

 

16K

197 × 273 mm

 

 

70 to 216 mm × 148 to 297

Statement

5-1/2 × 8-1/2 inches

 

mm

 

 

 

(2-13/16 to 8-1/2 inches ×

Folio

210 × 330 mm

 

 

5-13/16 to 11-11/16 inches)

 

 

 

Hagaki

100 × 148 mm

 

 

 

 

 

 

OufukuHagaki

148 × 200 mm

 

 

 

 

 

 

Youkei 2

114 × 162 mm

Other sizes of paper can be fed manually. The minimum size paper for

 

 

manual feed is 70 × 148 mm (2-13/16 × 5-13/16 inches), fed lengthwise.

Youkei 4

105 × 235 mm

The maximum size is 216 × 297 mm (8-1/2 × 11-11/16 inches).

 

 

 

 

 

 

Table 4-2

 

 

 

Smoothness

The paper should have a smooth, uncoated surface. Paper with a rough or sandy surface can cause voids in the printed output. Paper that is too smooth, however, can cause multiple feeding and fogging problems. (Fogging is a gray background effect.)

Basis Weight

Basis weight is the weight of a standard quantity of paper. In the traditional system the standard quantity is a ream consisting of 500 sheets measuring 17 × 22 inches each. In the metric system the standard quantity is 1 square meter.

Paper that is too light or too heavy can cause misfeeding, jams, and premature wear of the printer. Uneven paper weight can cause multiple feeds, print defects, poor toner fusing, blurring, and other print quality problems. The proper weight is 60 to 105 g/m2 for the paper cassette, and 60 to 163 g/m2 for the MP tray.

4-4

Page 49 Page 51
Image 50
Page 49 Page 51
Contents FS-1020D Regarding Tradenames Limitation of Remedies Limited WarrantyLicense GeneralTypeface Trademark Acknowledgement Agfa Japan License Agreement GuidelinesContents Fonts Appendix C Printer Specifications Introduction Guide to the Manuals DescriptionGuide to the Operation Guide Basic Operations Operator Panel Column of the table on the followingReference Name Status Meaning IndicatorsKeys Reference Name FunctionUnderstanding the Status Firmware versionSoftware Version Installation OptionsError Log Hardware InformationInterface Information KIR Test PatternMaintenance Replacement Toner Container ReplacementToner Container Replacement Interval Replenishing Toner Bag and dispose of itTake the new toner container from the bag. Hold it with Container at the positions marked Push Here until you hear Front Cover Cleaning the PrinterPrinter Interior Lift the process unit together with the toner container outNever stand the process unit on end RollerCleaner Home Position Next time you use the printerCorners of the top cover Troubleshooting General Guide for Troubleshooting Symptom Check Items Corrective ActionPrint Quality Problems Try setting the thin paper mode Check the EcoPrint settingToner indicator Adjust the corresponding custom paper typeCheck the paper size setting Check the file or programIndicators Maintenance Messages There is no cassette in the feeder, or Indicator KM-NET for Clients display Corrective ActionResolution because there is not enough Cassette is not inserted properlyEraser error 5300 error Errors Requiring Service Personnel AttentionScanner pin-photo error 4200 error Controller RAM read/write error F020 error Waste toner reservoir is full 7990 errorController check sum error F010 error Engine ROM check sum error F050 error Error Messages Make sure to turn the printer power off before inserting Indicator KM-NET for Corrective ActionPrinter power is on This message appears when the printer is in the readyNormal Indicator Display Following displays appear during normal printer operationPaper Jam Removal Jam at the Face-down Tray and the Rear CoverJam at the Paper Cassette Jam at the DuplexerPull the paper cassette all the way out of the printer Jam Inside the Printer To the MP tray. Instead, proceed to the next step Jam at the MP TrayNormal paper running direction Open the printer’s top and front covers RegistrationRegistration RollerMetalRollerMetal Paper Selection General Guidelines Paper SpecificationsSpecification Paper AvailabilityComposition Selecting the Right PaperCondition of the Paper Smoothness Basis WeightPaper Size SizePaper Grain Moisture ContentThickness Caliper Other Paper Properties Check that printing quality is satisfactory Special PaperTransparency overhead projection film Adhesive-Backed Labels Top sheet white bond paper Adhesive Carrier sheetPostcards EnvelopesPreprinted Paper Thick PaperColored Paper Recycled PaperMP Tray Paper Paper Weight Cassette Paper TypeFonts Internal Fonts List of Fonts Internal Scalable and Bitmap Fonts and Kpdl FontsList of Fonts List of Fonts Font Kpdl Fonts List of Fonts Appendix a Options Available Options Shall not be liable for damage due to improper installation Expansion Memory InstallationExpansion memory should be installed only by a Kyocera Mita Expansion memoryInstalling the Dimm Dimm to be usedInsert the Dimm into the Dimm socket so that the notches on Dimm align with the corresponding protrusions in the slotTesting the Expansion Memory Fasten it with the screwSetting the Printer Driver PropertiesMemory CompactFlash Card Again to restart the printerPush it in all the way Figure A-13Removed in step Network Interface CardInterface card Appendix B Host Computer Interface Nibble high Auto defaultParallel Interface NormalPin In/out Description 0V DCReset nInit Pin Data 0 1 to Data 7 8 Pins 2 toPaper Empty PError Pin Error* nFault PinSelect In nSelectIn Pin USB Interface Serial Interface Option RS-232C Interface Voltage Levels SG Signal Ground PinDTR Data Terminal Ready Pin H2 Data bits RS-232C ProtocolH1 Baud rate H3 Stop bitsH7 Buffer nearly-empty threshold H5 Protocol logicH6 Buffer nearly-full threshold H8 Received-data buffer sizeRS-232C Cable Connection Obtain a Suitable RS-232C CableDouble click on Communications Port \MODE LPT1=COM1 Appendix C Printer Specifications Printer Specifications Dimensions Power requirementsPower consumption WeightGlossary IEEE1284 Cassette modeFirst mode Dpi dots per inchParallel interface Prescribe commandsMP tray OfflineUSB Universal Serial Bus Sleep modeStatus Index EcoPrint Glossary-2Emulation Glossary-2Envelope Index-3 2003 Is a trademark of Kyocera Corporation

FS-1020D specifications

The Kyocera FS-1020D is a compact and efficient monochrome laser printer that is perfect for small office environments or personal use. Renowned for its reliability and the quality of its printing, this device combines advanced technologies with user-friendly features to enhance productivity.

One of the standout features of the FS-1020D is its compact design, which allows it to fit comfortably in limited spaces without sacrificing performance. With dimensions that make it easy to position on a desk or shelf, this printer caters well to those who require a powerful yet unobtrusive printing solution.

Printing at a speed of up to 20 pages per minute, the FS-1020D ensures that documents are produced quickly and efficiently, minimizing downtime and waiting periods. Its ability to handle a monthly duty cycle of up to 30,000 pages makes it suitable for multiple users, providing robust support for busy work environments.

The FS-1020D employs Kyocera's exceptional Laser Print Technology, which guarantees sharp text and detailed graphics, ideal for both professional documents and personal use. The resolution of 1200 x 1200 dpi ensures that prints are crisp and clear, which is vital for high-quality output. Additionally, the printer is equipped with an automatic duplexing feature, allowing users to print on both sides of the paper, thus reducing paper usage and contributing to sustainability efforts.

Another important characteristic of the FS-1020D is its compatibility with various operating systems, including Windows and Mac, allowing users flexibility when it comes to integration into existing workflows. The printer connects via USB, providing a straightforward setup for users without the complications often associated with network printers.

In terms of maintenance, the FS-1020D is designed for ease of use. Its long-lasting toner cartridges serve approximately 2,500 pages, significantly lowering the cost per print and eliminating the need for frequent replacements. This makes the printer an economical choice in the long run, particularly for small businesses looking to keep overhead costs manageable.

Overall, the Kyocera FS-1020D represents a blend of efficiency, quality, and practicality, making it a reliable choice for users in need of a dependable monochrome laser printer. Its compact design, impressive performance, and low operating costs position it as an attractive solution for a variety of printing needs.
Top Page Image Contents