Kyocera FS-1020D manual Adhesive-Backed Labels, Top sheet white bond paper Adhesive Carrier sheet

Page 54

Special Paper

4.3.2Adhesive-Backed Labels

The basic rule for printing on adhesive labels is that the adhesive must never come into contact with any part of the printer. Adhesive paper sticking to the drum or rollers will damage the printer.

Label paper must be manually fed.

Label paper has a structure comprising of three layers, as shown in Table 4-4on page 4-8. The top sheet is printed on. The adhesive layer consists of pressure- sensitive adhesives. The carrier sheet (also called the linear or backing sheet) holds the labels until use. Due to the complexity of its composition, adhesive-backed label paper is particularly likely to give trouble in printing.

Top sheet (white bond paper)

Adhesive

Carrier sheet

Figure 4-1

Adhesive label paper must be entirely covered by its top sheet, with no spaces between the individual labels. Labels with spaces in between are apt to peel off, causing serious paper jam problems.

Some label paper is manufactured with an extra margin of top sheet around the edge. Do not remove the extra top sheet from the carrier sheet until after printing is finished.

AcceptableUnacceptable

Top

sheet

Carrier sheet

Figure 4-2

Table 4-4lists the specifications for adhesive label paper.

Item

Specification

Weight of top sheet

44 to 74 g/m2 (12 to 20 lb/ream)

Composite weight

104 to 151 g/m2 (28 to 40 lb/ream)

Thickness of top sheet

0.086 to 0.107 mm (3.9 to 4.2 mils)

 

 

Composite thickness

0.115 to 0.145 mm (4.5 to 5.7 mils)

 

 

Moisture content

4 to 6% (composite)

 

 

Table 4-4

4-8

Image 54
Contents FS-1020D Regarding Tradenames Limitation of Remedies Limited WarrantyLicense GeneralTypeface Trademark Acknowledgement Agfa Japan License Agreement GuidelinesContents Fonts Appendix C Printer Specifications Introduction Guide to the Manuals DescriptionGuide to the Operation Guide Basic Operations Operator Panel Column of the table on the followingReference Name Status Meaning IndicatorsKeys Reference Name FunctionUnderstanding the Status Firmware versionSoftware Version Installation OptionsError Log Hardware InformationInterface Information KIR Test PatternMaintenance Toner Container Replacement Toner Container Replacement IntervalReplacement Replenishing Toner Bag and dispose of itTake the new toner container from the bag. Hold it with Container at the positions marked Push Here until you hear Front Cover Cleaning the PrinterPrinter Interior Lift the process unit together with the toner container outNever stand the process unit on end RollerCleaner Home Position Next time you use the printerCorners of the top cover Troubleshooting General Guide for Troubleshooting Symptom Check Items Corrective ActionPrint Quality Problems Try setting the thin paper mode Check the EcoPrint settingToner indicator Adjust the corresponding custom paper typeCheck the paper size setting Check the file or programIndicators Maintenance Messages There is no cassette in the feeder, or Indicator KM-NET for Clients display Corrective ActionResolution because there is not enough Cassette is not inserted properlyErrors Requiring Service Personnel Attention Scanner pin-photo error 4200 errorEraser error 5300 error Waste toner reservoir is full 7990 error Controller check sum error F010 errorController RAM read/write error F020 error Engine ROM check sum error F050 error Error Messages Make sure to turn the printer power off before inserting Indicator KM-NET for Corrective ActionPrinter power is on This message appears when the printer is in the readyNormal Indicator Display Following displays appear during normal printer operationPaper Jam Removal Jam at the Face-down Tray and the Rear CoverJam at the Paper Cassette Jam at the DuplexerPull the paper cassette all the way out of the printer Jam Inside the Printer Jam at the MP Tray Normal paper running directionTo the MP tray. Instead, proceed to the next step Open the printer’s top and front covers RegistrationRegistration RollerMetalRollerMetal Paper Selection General Guidelines Paper SpecificationsSpecification Paper AvailabilitySelecting the Right Paper Condition of the PaperComposition Smoothness Basis WeightPaper Size SizeMoisture Content Thickness CaliperPaper Grain Other Paper Properties Special Paper Transparency overhead projection filmCheck that printing quality is satisfactory Adhesive-Backed Labels Top sheet white bond paper Adhesive Carrier sheetPostcards EnvelopesPreprinted Paper Thick PaperColored Paper Recycled PaperMP Tray Paper Paper Weight Cassette Paper TypeFonts Internal Fonts List of Fonts Internal Scalable and Bitmap Fonts and Kpdl FontsList of Fonts List of Fonts Font Kpdl Fonts List of Fonts Appendix a Options Available Options Shall not be liable for damage due to improper installation Expansion Memory InstallationExpansion memory should be installed only by a Kyocera Mita Expansion memoryInstalling the Dimm Dimm to be usedInsert the Dimm into the Dimm socket so that the notches on Dimm align with the corresponding protrusions in the slotTesting the Expansion Memory Fasten it with the screwSetting the Printer Driver PropertiesMemory CompactFlash Card Again to restart the printerPush it in all the way Figure A-13Network Interface Card Interface cardRemoved in step Appendix B Host Computer Interface Nibble high Auto defaultParallel Interface NormalPin In/out Description 0V DCReset nInit Pin Data 0 1 to Data 7 8 Pins 2 toPaper Empty PError Pin Error* nFault PinSelect In nSelectIn Pin USB Interface Serial Interface Option SG Signal Ground Pin DTR Data Terminal Ready PinRS-232C Interface Voltage Levels H2 Data bits RS-232C ProtocolH1 Baud rate H3 Stop bitsH7 Buffer nearly-empty threshold H5 Protocol logicH6 Buffer nearly-full threshold H8 Received-data buffer sizeRS-232C Cable Connection Obtain a Suitable RS-232C CableDouble click on Communications Port \MODE LPT1=COM1 Appendix C Printer Specifications Printer Specifications Dimensions Power requirementsPower consumption WeightGlossary IEEE1284 Cassette modeFirst mode Dpi dots per inchParallel interface Prescribe commandsMP tray OfflineSleep mode StatusUSB Universal Serial Bus Index EcoPrint Glossary-2Emulation Glossary-2Envelope Index-3 2003 Is a trademark of Kyocera Corporation

FS-1020D specifications

The Kyocera FS-1020D is a compact and efficient monochrome laser printer that is perfect for small office environments or personal use. Renowned for its reliability and the quality of its printing, this device combines advanced technologies with user-friendly features to enhance productivity.

One of the standout features of the FS-1020D is its compact design, which allows it to fit comfortably in limited spaces without sacrificing performance. With dimensions that make it easy to position on a desk or shelf, this printer caters well to those who require a powerful yet unobtrusive printing solution.

Printing at a speed of up to 20 pages per minute, the FS-1020D ensures that documents are produced quickly and efficiently, minimizing downtime and waiting periods. Its ability to handle a monthly duty cycle of up to 30,000 pages makes it suitable for multiple users, providing robust support for busy work environments.

The FS-1020D employs Kyocera's exceptional Laser Print Technology, which guarantees sharp text and detailed graphics, ideal for both professional documents and personal use. The resolution of 1200 x 1200 dpi ensures that prints are crisp and clear, which is vital for high-quality output. Additionally, the printer is equipped with an automatic duplexing feature, allowing users to print on both sides of the paper, thus reducing paper usage and contributing to sustainability efforts.

Another important characteristic of the FS-1020D is its compatibility with various operating systems, including Windows and Mac, allowing users flexibility when it comes to integration into existing workflows. The printer connects via USB, providing a straightforward setup for users without the complications often associated with network printers.

In terms of maintenance, the FS-1020D is designed for ease of use. Its long-lasting toner cartridges serve approximately 2,500 pages, significantly lowering the cost per print and eliminating the need for frequent replacements. This makes the printer an economical choice in the long run, particularly for small businesses looking to keep overhead costs manageable.

Overall, the Kyocera FS-1020D represents a blend of efficiency, quality, and practicality, making it a reliable choice for users in need of a dependable monochrome laser printer. Its compact design, impressive performance, and low operating costs position it as an attractive solution for a variety of printing needs.