NEC PA242W user manual ECO Information, OSD Warning, English-16

Page 18

FACTORY PRESET

Selecting FACTORY PRESET allows you to reset all OSD control settings (BRIGHTNESS, CONTRAST*1, ECOMODE, BLACK, IMAGE CONTROL, COLOR CONTROL SYSTEM, SHARPNESS, PIP MODE, PIP INPUT, PIP LEFT/RIGHT, PIP DOWN/UP, PIP SIZE, USB SELECTION, OFF TIMER, OFF MODE, OSD LEFT/RIGHT, OSD UP/DOWN, OSD TURN OFF, OSD TRANSPARENCY) back to the factory settings. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button.

NOTE: If you want reset to include the Picture calibration settings and SELF COLOR CORRECTION settings, please use FACTORY PRESET in Advanced OSD menu (see page 24).

ECO Information

CARBON SAVINGS: Displays the estimated carbon savings information in kg.

CARBON USAGE: Displays the estimated carbon usages information in kg.

This is the arithmetic estimation, not actual measurement value.

This estimation is based without any options.

COST SAVINGS: Displays the electricity cost savings in balance.

CARBON CONVERT SETTING: Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting is based on the OECD (2008 Edition).

CURRENCY SETTING: Displays electricity pricing in 6 currency units.

CURRENCY CONVERT SETTING: Displays electricity savings in kW/hour (US Currency is default).

NOTE: This model’s initial setting is “Currency = US$” and its Currency Convert setting = $0.11. This setting can be changed by using the ECO information menu.

If you want to use the French setting, please refer to steps below:

1.Open menu by pressing the Menu button and select the ECO information menu using the “LEFT” or “RIGHT” key.

2.Select CURRENCY SETTING item pressing the “UP” or “DOWN” key.

3.The French currency unit is Euro (). You can adjust currency setting to Euro icon () from US dollar ($) using the “LEFT” or “RIGHT” key in Current setting item.

4.Select CURRENCY CONVERT SETTING item using the “UP” or “DOWN” key.

This initial Euro () setting is Germany of OECD (2007 Edition).

Please check receipt of French’s electricity prices or OECD data for French. French of OECD (2007 Edition) was 0.12.

5. Adjust CURRENCY CONVERT SETTING item using the “LEFT” or “RIGHT” key.

Information

Provides information about the current resolution display (Main picture), current USB input setting and technical data including the preset timing being used and the horizontal and vertical frequencies. Indicates the model and serial numbers of your monitor.

OSD Warning

OSD Warning menus disappear with EXIT button.

NO SIGNAL: This function gives a warning when there is no Horizontal or Vertical Sync. After power is turned on or when there is a change of input signal, the No Signal window will appear.

RESOLUTION NOTIFIER: This function warms if resolution other than the optimized resolution is used. After power is turned on or when there is a change of input signal or the video signal doesn’t have proper resolution, the Resolution Notifier window will open. This function can be disabled in the MENU Tools.

OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned on or there is a change of input signal or if the video signal doesn’t have proper timing, the Out Of Range menu will appear.

INTERLACED SIGNALS ARE NOT SUPPORTED: This function gives a warning when the interlace signal is used. While the image is visible, change the signal of the device from interlaced to progressive (non-interlaced).

See “No Picture” in Troubleshooting for detailed information.

If you need detailed information about the controls, please use the ADVANCED OSD menu.

*1: Only for PA242W.

English-16

Image 18
Contents MultiSync PA242W MultiSync PA272W MultiSync PA302W Index English-37English-1 Declaration of Conformity Registration InformationFCC Information English-2Safety Precautions and Maintenance Recommended useEnglish-3 Ergonomics Cleaning the LCD PanelCleaning the Cabinet English-4Product Features ContentsQuick Start English-6English-7 USB downstream*2 Highest Stand PositionRaise and Lower Monitor Screen English-8Swivel Screen RotationTilt English-9Mount Flexible arm Flexible Arm InstallationRemove Monitor Stand for Mounting English-10Controls English-11Image Controls Auto Adjust Analog input onlyBrightness/Contrast Controls English-12Color Control Systems English-13Tools Main Image Rotation on / SUB Image Rotation onEnglish-14 Menu Tools English-15OSD Warning ECO InformationInformation English-16Using the Picture Mode function Type of PresetEnglish-17 To exit the advanced menu Method To access the advanced menuAdvanced OSD English-18English-19 English-20 English-21 English-22 English-23 English-24 English-25 Specifications PA242W Monitor Specifications MultiSync PA242WEnglish-26 Specifications PA272W Monitor Specifications MultiSync PA272WEnglish-27 Specifications PA302W Monitor Specifications MultiSync PA302WEnglish-28 Features English-29Troubleshooting No Video Picture is not as brightDisplay image is not sized properly Brightness variations over timeUsing the Auto Brightness function English-32Self Calibration PA302W only English-33Figure S.3 English-34White Point Matching/Copy PA302W only English-35Figure C.6 English-36Energy Saving Manufacturer’s Recycling and Energy InformationDisposing of your old NEC product Weee Mark European Directive 2012/19/EU