4.Connect all cables to the appropriate connectors (Figure C.1). When using the USB cable, connect the B type connector to the USB upstream port on the right back side of the monitor and the A type connector to the downstream port on the computer (Figure C.1a). If using the cord from a USB device, plug into one of the downstream ports of the monitor.
NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of LCD module and/or shorten the module’s life.
English
30° Tilt
USB downstream
Highest
Stand
Position
30° Tilt
USB downstream*2
Highest
Stand
Position
A Type
B Type
A Type
USB downstream |
| USB downstream |
|
USB upstream1 |
| USB upstream1 |
|
USB upstream2 | USB upstream2 |
| |
| Mini DisplayPort | ||
DisplayPort | |||
HDMI | DisplayPort | HDMI | |
B Type
Figure C.1a
Power cord | Power cord |
(PA242W only) | (PA272W/PA302W) |
Figure C.1 |
|
5.To keep the cables neatly organized, place them into the cable management system that is built into the stand. Place the cables in the hooks fi rmly and evenly (Figure C.2 and Figure C.3).
6.Please check that you can still rotate, raise and lower the monitor screen when you have installed the cables.
USB Cable
DisplayPort Cable
HDMI Cable*1
DVI Cable
Power Cord |
USB Cable*2 |
DisplayPort |
Cable*1 |
DVI Cable
Mini DisplayPort
Cable
(PA242W only) | Figure C.2 | (PA272W/PA302W) |
|
|
HDMI Cable*1
Power Cord
Power Cord | Power Cord | |
HDMI Cable*1 | ||
DVI Cable | Mini DisplayPort | |
Cable | ||
HDMI Cable*1 | ||
DVI Cable | ||
DisplayPort Cable | DisplayPort Cable*1 | |
USB Cable | USB Cable*2 |
(PA242W only)
*1: Cable not included.
*2: Connect sensor to this port for self calibration (PA302W only).
Figure C.3 | (PA272W/PA302W) |