NEC PA242W user manual English-21

DIGITAL LONG

Compensates for image degradation caused by using a long cable.

English

CABLE

A lower number produces less compensation.

(DVI/HDMI input only)

DIGITAL LONG

Compensates for disturbed image caused by using a long DisplayPort cable.

CABLE (DP/Mini-DP*1

There are 2 possible settings, 1 and 2. Setting “2” produces a better result, but may

input only)

reduce display colors. The default setting is “1”.

Tag4

AUTO ADJUST*, *2

Automatically adjusts the Image Position and H.SIZE settings and FINE settings.

(Analog input only)

Press “SELECT” to activate Auto Adjustment. Please use test pattern, which is included

in the enclosed CD-ROM.

SIGNAL ADJUST*

Determines when the auto adjustment is activated automatically.

(Analog input only)

The choices are “SIMPLE” and “FULL”. Press “LEFT” or “RIGHT” to select.

H-size, Fine, H/V Position

Contrast

SIMPLE

O

X

FULL

O

O

O: Automatic Adjustment

X: No Automatic Adjustment

NOTE: Automatic Adjustment does not work at resolutions less than 800x600 resolution.

AUTO ADJUST

Determines the automatic adjustment level for AUTO ADJUST. The choices are “SIMPLE”,

LEVEL*

“FULL” and “DETAIL”. Press “LEFT” or “RIGHT” to select. Refer to the below table.

(Analog input only)

Size, Fine, Position

Contrast

Black Level

Time

SIMPLE

O

X

X

1 second

FULL

O

O

X

1.5 seconds

DETAIL*

O

O

O

5 seconds

O: Automatic Adjustment

X: No Automatic Adjustment

* “DETAIL” activates automatic long cable (skew, peaking) adjustment.

A-NTAA SW*

The Advanced No Touch Auto Adjust function is able to recognize new signals even

(Analog input only)

when neither the resolution nor the refresh rate has changed. If several PCs are

connected to the monitor, and each transmit very similar (or even the same) signals in

terms of resolution and refresh rates, the monitor recognizes that there is a new signal

and automatically optimizes the picture without the need for any action on the part of the

user.

OFF: A-NTAA is disabled.

ON: If a change in signal is detected A-NTAA will adjust the monitor to the optimal

settings for the new signal. If no change in the signal is detected then A-NTAA does not

activate. The screen will be blank while the monitor optimizes the signal.

OPTION: Functions the same as ON, except that the screen does not go blank when the

monitor makes adjustments for changes in signal, allowing the monitor to display the new

signal faster. When using an external switching device to connect 2 or more PCs to the

monitor, using the ON or OPTION settings is suitable.

AUTO CONTRAST*, *2

Adjusts the image displayed for non-standard video inputs. Press “SELECT” to adjust.

(Analog input only)

Any adjustment requires the image to have white portions.

CONTRAST*

Adjusts the image brightness and contrast in relation to the background.

(Analog input only)

Press “LEFT” or “RIGHT” to adjust.

AUTO BLACK LEVEL*, *2

Automatically adjusts the black level. Any adjustment requires the image to have black

(Analog input only)

portions. Press “SELECT” to activate AUTO ADJUST.

BLACK LEVEL*

Adjusts the RGB black level by input signal level.

(Analog input only)

VIDEO LEVEL

NORMAL: For computer setting. Displays all input signals of 0-255 steps.

(HDMI input only)

EXPAND: For audio-visual equipment setting. Expands input signals of 16-235 steps to

0-255 steps.

AUTO: Auto setting depending on the input signal.

Tag5

H.POSITION

Controls Horizontal Image Position within the display area of the LCD.

Press “LEFT” or “RIGHT” to adjust.

V.POSITION

Controls Vertical Image Position within the display area of the LCD.

Press “LEFT” or “RIGHT” to adjust.

*

Only for PA242W.

*1

Only for PA272W/PA302W.

*2

This item does not reset by FACTORY PRESET (Tag7).

English-21