NEC PA242W user manual Recommended use, Safety Precautions and Maintenance, English-3

Page 5

Recommended use

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE

THE FOLLOWING WHEN SETTING UP AND

USING THE LCD COLOR MONITOR:

DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualifi ed service personnel.

Do not spill any liquids into the cabinet or use your monitor near water.

Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful or fatal or may cause electric shock, fi re or equipment failure.

Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fi re.

Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to the monitor.

The power supply cord you use must have been approved by and comply with the safety standards of your country. (Type H05VV-F 3G 1mm2 should be used in Europe).

In UK, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use with this monitor.

Do not place any objects onto the monitor and do not use the monitor outdoors.

Do not bend power cord.

Do not use monitor in high temperatured, humid, dusty, or oily areas.

Do not cover vent on monitor.

Vibration can damage the backlight. Do not install where the monitor will be exposed to continual vibration.

If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.

To prevent damage to the LCD monitor caused by tipping over due to earthquakes or other shocks, make sure to install the monitor in a stable location and take measures to prevent falling.

Immediately turn off the power, unplug your monitor from the wall outlet and move to a safe location then refer servicing to qualifi ed service personnel under the following conditions. If the monitor is used in this condition, the monitor may cause fall, fi re and electric shock:

If the monitor stand has been cracked or peeled.

If the monitor has been wobbled.

If the monitor has an unusual odor.

When the power supply cord or plug is damaged.

If liquid has been spilled, or objects have fallen into the monitor.

If the monitor has been exposed to rain or water.

If the monitor has been dropped or the cabinet damaged.

If the monitor does not operate normally by following operating instructions.

Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated

openings or place the monitor near a radiator or other heat sources. Do not put anything on top of monitor.

CAUTION

• The power cable connector is the primary means of detaching the system from the power supply.

The monitor should be installed close to a power outlet which is easily accessible.

 

 

 

 

• Handle with care when transporting. Save packaging for transporting.

PA302W only:

 

 

 

• Do not touch LCD panel surface while transporting, mounting and setting.

 

 

Applying pressure on the LCD panel can cause serious damage.

 

 

• The monitor must be installed or carried by two or more people (PA302W only).

 

 

• Carry the monitor holding the built-in handle and bottom frames of the monitor

 

 

(PA302W only).

 

 

• Do not carry holding only the stand (PA302W only).

 

Image Persistence: Image persistence is when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided.

To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

English

English-3

Image 5
Contents MultiSync PA242W MultiSync PA272W MultiSync PA302W English-37 IndexEnglish-1 FCC Information Registration InformationDeclaration of Conformity English-2English-3 Safety Precautions and MaintenanceRecommended use Cleaning the Cabinet Cleaning the LCD PanelErgonomics English-4Contents Product FeaturesEnglish-6 Quick StartUSB downstream*2 Highest Stand Position English-7English-8 Raise and Lower Monitor ScreenTilt Screen RotationSwivel English-9Remove Monitor Stand for Mounting Flexible Arm InstallationMount Flexible arm English-10English-11 ControlsBrightness/Contrast Controls Auto Adjust Analog input onlyImage Controls English-12English-13 Color Control SystemsEnglish-14 ToolsMain Image Rotation on / SUB Image Rotation on English-15 Menu ToolsInformation ECO InformationOSD Warning English-16English-17 Using the Picture Mode functionType of Preset Advanced OSD Method To access the advanced menuTo exit the advanced menu English-18English-19 English-20 English-21 English-22 English-23 English-24 English-25 English-26 Specifications PA242WMonitor Specifications MultiSync PA242W English-27 Specifications PA272WMonitor Specifications MultiSync PA272W English-28 Specifications PA302WMonitor Specifications MultiSync PA302W English-29 FeaturesTroubleshooting Display image is not sized properly Picture is not as brightNo Video Brightness variations over timeEnglish-32 Using the Auto Brightness functionEnglish-33 Self Calibration PA302W onlyEnglish-34 Figure S.3English-35 White Point Matching/Copy PA302W onlyEnglish-36 Figure C.6Disposing of your old NEC product Manufacturer’s Recycling and Energy InformationEnergy Saving Weee Mark European Directive 2012/19/EU