Quick Start - continued
Tilt
Grasp both sides of the monitor screen with your hands
and adjust the tilt as desired (Figure TS.1).Figure TS.1 NOTE: Handle with care when tilting the monitor screen.
Raise and Lower Monitor Screen
The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1).
NOTE: Handle with care when raising or lowering the monitor screen
Figure RL.1
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1.Disconnect all cables.
2.Place monitor face down on a nonabrasive surface (Figure R.1).
3.Remove the 4 screws connecting the monitor to the stand and remove the stand as indicated (Figure R.2).
The monitor is now ready for mounting in an alternate manner.
4.Connect the AC cord and signal cable to the back of the monitor (Figure R.3).
5.Reverse this process to reattach stand.
NOTE: Use only
NOTE: Handle with care when removing monitor stand.
Figure R.1 | Figure R.2 | Figure R.3 |
|
|
|
|
|
|
surface