Lexmark 782n Installing memory, option, or interface cards, Accessing the printer system board

Page 22

Step 12: Installing memory, option, or interface cards

Step 12: Installing memory, option, or interface cards

Note: If you purchased the printer as part of a bundle, memory cards have been preinstalled.

CAUTION:If you are installing memory or option cards sometime after setting up the printer, turn the printer off, and unplug the power cord from the wall outlet before continuing.

The instructions in this section help you install the interface card, memory card, and “option- added” firmware card. Information about other memory or option cards can be found in the printer User’s Guide.

Accessing the printer system board

You must access the printer system board to install the interface card, memory card, and firmware card.

Note: Use a Phillips screwdriver to remove the system board access cover.

1Locate the system board access cover on the back of the printer.

2Remove the four access cover screws.

3Remove the access cover, and set it aside.

Use the illustration to locate the connector for the card you want to install.

System board

Option card

Firmware and flash memory cards

Memory card connector

Step 12: Installing memory, option, or interface cards

22

Image 22

Contents MFP Option Stability Information Page English United States Government Rights Static sensitivity notice Turning off the printer MFP configurationsOverview Selecting a location for your printer and MFPCustomizing your MFP option Input options Output options Other optionsSetting up furniture Installing the duplex unit Installing optional drawersUnboxing the printer Preparing the printer Removing the print cartridge packagingRemoving the print cartridge packaging Preparing the printer Loading paper Installing an optional operator panel cover Attaching a scanner shelf Installing the scanner on a scanner shelf Installing the scanner on a scanner shelfInstalling the scanner on a scanner shelf Installing the scanner without a scanner shelf Unlocking the scannerInstalling the scanner without a scanner shelf Installing output options Installing memory, option, or interface cards Accessing the printer system boardInstalling a memory card Installing an option-added firmware card Installing the interface card Installing memory, option, or interface cards Replacing the access cover plate Attaching cables to the printer and the scanner Attaching cables to the printer and the scanner Attaching cables to the printer and the scanner Installing drivers for the printer, MFP, and other options Installing driversSetting up fax and IP addresses Fax setupAssigning a printer IP address Performing browser fax setup Printing the Help pages Verifying MFP setupPrinting a menu settings Making a test copyTesting a scan to PC profile Click Scan Profile Click Create Scan ProfileSolving setup problems Getting more help