Lexmark 782n setup guide Installing an option-added firmware card

Page 24

Step 12: Installing memory, option, or interface cards

Installing an “option-added” firmware card

Note: “Option-added” firmware cards designed for other Lexmark printers will not work with the printer.

1Remove the system board access cover from the back of the printer. (See Accessing the printer system board.) Note: If an “option-added” firmware card has already been installed, you must remove it.

2Unpack the “option-added” firmware card.

3Holding the card by its sides, align the pins on the card with the holes on the system board.

4Push the “option-added” firmware card firmly into place.

The entire length of the connector on the “option-added” firmware card must touch the system board and be locked into the connector.

Be careful not to damage the connectors.

Pins

Installing an “option-added” firmware card

24

Image 24

Contents MFP Option Stability Information Page English United States Government Rights Static sensitivity notice MFP configurations OverviewTurning off the printer Selecting a location for your printer and MFPCustomizing your MFP option Input options Output options Other optionsSetting up furniture Installing optional drawers Installing the duplex unitUnboxing the printer Preparing the printer Removing the print cartridge packagingRemoving the print cartridge packaging Preparing the printer Loading paper Installing an optional operator panel cover Attaching a scanner shelf Installing the scanner on a scanner shelf Installing the scanner on a scanner shelfInstalling the scanner on a scanner shelf Installing the scanner without a scanner shelf Unlocking the scannerInstalling the scanner without a scanner shelf Installing output options Installing memory, option, or interface cards Accessing the printer system boardInstalling a memory card Installing an option-added firmware card Installing the interface card Installing memory, option, or interface cards Replacing the access cover plate Attaching cables to the printer and the scanner Attaching cables to the printer and the scanner Attaching cables to the printer and the scanner Installing drivers for the printer, MFP, and other options Installing driversSetting up fax and IP addresses Fax setupAssigning a printer IP address Performing browser fax setup Verifying MFP setup Printing a menu settingsPrinting the Help pages Making a test copyTesting a scan to PC profile Click Scan Profile Click Create Scan ProfileSolving setup problems Getting more help