VIVOTEK

Hardware Installation

Connecting Ethernet Cable

1. Insert your Ethernet cable through the opening at the bottom of the camera bracket.

2. If using a round cable: When the RJ-45 plug is fully inserted, use the round-head screw with a washer to secure its position from the bottom of the bracket.

If using a flat cable: Pass the cable through the opening and attach to camera.

Round cable

Flat cable

IMPORTANT:

Record the MAC address before installing the camera.

NOTE:

It is recommended to use an Ethernet cable that comes without the strain relief boot. You can remove the boot if your cable comes with one.

Strain relief boot

User's Manual - 9

Page 9
Image 9
Vivotek CC8130 user manual Hardware Installation, Connecting Ethernet Cable