Vivotek CC8130 IR cut control, Uart control, Group ircutcontrol capability.nvideoinprofile

VIVOTEK

preset_i<0~19>_size

<window size> <blank>

1/7

Width and height of the preset.

(It should be set by ePreset.cgi rather than by setparam.cgi.)

7.33 IR cut control

Group: ircutcontrol (capability.nvideoinprofile > 0)

NAME		VALUE		DEFAULT		SECURITY		DESCRIPTION
						(get/set)
mode	auto,			auto	6/6			Set IR cut control mode
		day,
		night,
		di,
		schedule
daymodebegintime	00:00~23:59		07:00		6/6			Day mode begin time
daymodeendtime	00:00~23:59		18:00		6/6			Day mod end time
bwmode	<boolean>		1		6/6		Switch to B/W in night mode
								if enabled

7.34 UART control

Group: uart (capability.nuart > 0)

	NAME		VALUE		DEFAULT			SECURITY		DESCRIPTION
								(get/set)
	ptzdrivers_i<0~19,		string[40]	<product			1/4		Name of the PTZ driver.
	127>_name				dependent>
	ptzdrivers_i<0~19,		string[128]	< product			1/4		Full path of the PTZ driver.
	127>_location				dependent >
	enablehttptunnel		<boolean>	0			4/4			Enable HTTP tunnel channel
										to control UART.
Group: uart_i<0~(n-1)>n is uart port count (capability.nuart > 0)
	NAME		VALUE		DEFAULT		SECURITY			DESCRIPTION
							(get/set)
	baudrate	110,300,600,12		9600		4/4			Set baud rate of COM port.
		00,2400,3600,4
		800,7200,9600,
		19200,38400,57

156 - User's Manual 56