VIVOTEK
Exposure control:
■Exposure level: You can manually set the Exposure level, which ranges from
Flickerless: Under some circumstances when there is a differnece between the video capture frequency and local AC power frequency (NTSC or PAL), the mismatch causes color shifts or flickering images. If the above mismatch occurs, select the Flickerless checkbox, and the range of Exposure time (the shutter time) will be limited to a range in order to match the AC power frequency. See the screen capture below.
You can click and drag the
When completed with the settings on this page, click Save to enable the settings.
If you want to configure another sensor setting for a schedule mode, please click Profile to open the Profile settings page.
Please follow the steps below to setup a profile:
1.Check Enable and apply this profile.
2.Select the applied mode: Schedule mode. Please manually enter a range of time during which the Schedule mode will apply.
3.Configure Exposure control settings in the folowing columns. Please refer to the previous page for detailed information.
4.Click Save to enable the setting and click Close to exit the window.
44 - User's Manual