VIVOTEK

Sharpness: Adjust the image sharpness level, which ranges from 0% to 100%.

You can click on Restore to recall the original settings without incorporating the changes. When completed with the settings on this page, click Save to enable the setting.

If you want to configure another sensor setting using the schedule mode, please click Profile to open the Profile Settings page as shown below.

Please follow the steps below to setup a profile:

1.Select the Enable and apply this profile checkbox.

2.Select the Schedule mode. Please manually enter a range of time.

3.Configure the White balance and Image adjustment settings in the following columns. Please refer to the previous page for detailed information.

4.Click Save to enable the settings and click Close to exit the page.

42 - User's Manual

Page 42
Image 42
Vivotek CC8130 user manual Select the Enable and apply this profile checkbox