Acer Altos G500 manual Appendix a ASM Pro quick installation guide

100 Appendix A: ASM Pro quick installation guide

2Mount the CD-ROM drive. For example, mount the CD-ROM to / mnt.

3Insert an empty 1.44-MB diskette into your floppy drive and execute the command:

# dd if={PATH}/asmuw.dd of=/dev/rdsk/f03ht

Here, {PATH} denotes the directory where asmuw.dd is located. For example, /mnt/UnixWare.

4Insert the ASM Pro installation diskette into your floppy drive and, at the shell prompt, execute this command to begin ASM Pro installation:

# pkgadd -d diskette1 asm

The installation process copies the ASM Pro Server Agent package into the /usr/asm directory, and automatically makes changes to the following system configuration files:

/etc/netmgt/snmpd.comm

/etc/netmgt/snmpd.peers

/etc/inittab

After the installation is complete, ASM Pro Server Agent can be manually started by executing the command:

# /usr/asm/asmsmuxd

or it will be automatically started on the next system reboot.

Note: Before starting ASM Pro SMUX Agent asmsmuxd, execute the ASM Pro Agent Configuration Utility asmcfg to configure at least "SNMP", "ASM Pro_Password" and other parameters. Refer to “Chapter 4 - ASM Pro Server Agent Utilities” in the ASM Pro manual for detailed instructions on using the ASM Pro Configuration Utility.

Installing the Microsoft Windows NT V4.0 Server or Windows 2000 Server/Advanced Server Agent

Note: Before installing the ASM Pro software, make sure that the TCP/IP and its related SNMP service are installed on the server.