88 | 4 BIOS Setup utility |
Parameter | Description | Option |
|
|
|
Hidden | If you want the hidden partition to |
Partition | become accessible, set this parameter to |
| Enabled. When enabled, the server boots |
| to the hidden partition. |
Disabled
Enabled
Communication | This parameter specifies the parity, stop |
Protocol | bits, and data length for the COM port to |
| use for the RDM connection. This is fixed |
| at N(none), 8, 1 setting and is non- |
| configurable. |
N
8
1
COM Port Baud | This parameter lets you set the transfer |
Rate | rate of the COM for the RDM connection. |
| The parameter setting depends on your |
| modem specification; therefore, before |
| you change the setting of this parameter, |
| check the documentation that came with |
| your modem. |
9600
57600
Remote | This parameter allows you to set the phone User input |
Console Phone | number of the RDM manager station that |
No. | the RDM module must dial once RDM is |
| activated and the Remote Console is |
| enabled. To set, simply highlight the |
| parameter and enter the Remote Console |
| phone number. |
| If the remote console phone number is |
| using an (X) line, then you must enter six |
| commas (,) after the phone number and |
| before the extension number, if any. |
| When entering the extension number, we |
| recommend that you insert a comma after |
| each number. The commas specify delay. |
| If this parameter is left blank, the Remote |
| Console calling function is disregarded. |
Dial Out Retry | This parameter lets you specify the |
Times | maximum number of times the RDM server |
| must retry to connect to the RDM manager |
| station once the server fails and RDM is |
| activated. If the server has completed the |
| specified number of tries and the |
| connection still fails, the server bypasses |
| RDM and goes into normal mode. |
2
4
8
Infinite
