
75
Parameter | Description | Option |
|
|
|
System Sleep | This parameter sets the system to the |
Timer | lowest |
| specified period of inactivity. Any |
| keyboard or mouse action or any activity |
| detected from the IRQ channels resumes |
| system operation. |
Off
On
Sleep Mode | Lets you specify the |
| that the system will enter after a specified |
| period of inactivity. |
| This parameter becomes configurable only |
| if the System Sleep Timer is on. Any |
| keyboard or mouse action, or any enabled |
| monitored activities occurring through the |
| IRQ channels resume system operation. |
Standby
Suspend
Power Switch | When set to Power off, the system |
< 4 sec. | automatically turns off when the power |
| switch is pressed for less than 4 seconds. |
| When set to Suspend, the system enters |
| the suspend mode when the power switch |
| is pressed for less than 4 seconds. |
Power off
Suspend
System Wake- | The system |
|
up Event | system to resume operation when the |
|
| modem ring indicator is enabled. |
|
|
|
|
Modem ring | When enabled, any fax/modem activity | Disabled |
indicator | wakes up the system from suspend mode. | Enabled |
|
|
|
PCI Power | Enables or disabled the PCI power | Enabled |
Management | managment function | Disabled |
|
|
|
RTC Alarm | Allows you to set a certain time on a | Disabled |
| certain day to | Enabled |
| suspend mode. |
|
|
|
|
Resume Day | If RTC alarm is enabled, the system will | User input |
| resume operation on the day indicated |
|
| here. |
|
|
|
|
Resume Time | If RTC alarm is enabled, the system will | User input |
| resume operation at the time indicated |
|
| here. |
|
|
|
|