97
ASM Pro Server Agent requires SNMP.NLM running with Control Community set to 'public' to allow ASM Pro Console to communicate with ASM Pro Server Agent.
ASMAGENT.NCF is the script file that loads all related modules of ASM Pro Server Agent. To load the SNMP use the following command:
load snmp control=public
If you load SNMP.NLM before ASM Pro Server Agent, make sure that the Control Community has been set up properly. For more information, please refer to related documents about the SNMP Agent for NetWare (NetWare SNMP).
Check AUTOEXEC.NCF to see if you have loaded SNMP. Notice that because of the auto loading feature of NLM, you can not directly find where SNMP is loaded. The most common module is TCPIP.NLM which auto loads SNMP.NLM. If you are using TCP/IP, load SNMP by using the command line load snmp control=public before loading TCPIP.
For NetWare 4.x and Netware 5.x users, if you are using INETCFG.NLM to configure the network, be sure to configure SNMP and make sure that the SNMP.NLM is running with Control Community set to ‘public’.
To install the Novell NetWare Server Agent:
1Insert the Management CD into your system’s
2At Netware server console, type:
load cdrom.
3 At Netware server console,type:
load EB450MgmtCD:\APP\ASM\Netware\setup.
4You are asked if you want to install the ASM Pro Server Agent on your system. Select Yes to install.
The setup program detects the NetWare version and the model of the server. It copies related NLM files into the SYS: SYSTEM directory and C: of your NetWare server, and some needed command lines are added into AUTOEXEC.NCF in SYS: SYSTEM.
5If the Mylex GAM driver and GAM service is installed in your NetWare system, the setup program asks you to install the Bbp agent.
6Press any key to continue. The ASM Pro Server Agent Configuration Utility is launched.
