Lexmark 782n setup guide Replacing the access cover plate

Page 27

Step 12: Installing memory, option, or interface cards

4Align the connection points on the card with the connector on the system board, and then push the top of the card firmly into the system board connector.

5Insert and tighten the screws to secure the card.

Replacing the access cover plate

After you have installed options on the printer system board, follow these steps to reattach the access cover plate.

1Align the slots at the top of the access cover with the screws near the top of the printer.

2Slide the cover up under the top cover lip as far as it will go.

3Insert and tighten the (four) screws at the top and bottom of the cover.

Replacing the access cover plate

27

Image 27

Contents MFP Option Stability Information Page English United States Government Rights Static sensitivity notice Selecting a location for your printer and MFP MFP configurationsOverview Turning off the printerInput options Output options Other options Customizing your MFP optionSetting up furniture Installing optional drawers Installing the duplex unitUnboxing the printer Removing the print cartridge packaging Preparing the printerRemoving the print cartridge packaging Preparing the printer Loading paper Installing an optional operator panel cover Attaching a scanner shelf Installing the scanner on a scanner shelf Installing the scanner on a scanner shelfInstalling the scanner on a scanner shelf Unlocking the scanner Installing the scanner without a scanner shelfInstalling the scanner without a scanner shelf Installing output options Accessing the printer system board Installing memory, option, or interface cardsInstalling a memory card Installing an option-added firmware card Installing the interface card Installing memory, option, or interface cards Replacing the access cover plate Attaching cables to the printer and the scanner Attaching cables to the printer and the scanner Attaching cables to the printer and the scanner Installing drivers Installing drivers for the printer, MFP, and other optionsFax setup Setting up fax and IP addressesAssigning a printer IP address Performing browser fax setup Making a test copy Verifying MFP setupPrinting a menu settings Printing the Help pagesClick Scan Profile Click Create Scan Profile Testing a scan to PC profileGetting more help Solving setup problems