Lexmark 782n setup guide Installing a memory card

Page 23

Step 12: Installing memory, option, or interface cards

Installing a memory card

Note: Printer memory cards designed for other Lexmark printers may not work with the printer.

1Remove the system board access cover from the back of the printer. (See Accessing the printer system board.)

Warning: Printer memory cards are easily damaged by static electricity. Touch something metal such as the printer frame before you touch a memory card.

2Push open the latches on both ends of the memory card connector.

3Unpack the memory card.

Avoid touching the connection points along the edge of the card. Save the packaging.

4Align the notches on the bottom of the card with the notches on the connector.

5Push the memory card firmly into the connector until the latches on either end of the connector snap into place. It may require some force to fully seat the card.

6Make sure each latch fits over the notch on the end of the card.

Memory card connector

Memory card

Memory card connector

Installing a memory card

23

Image 23

Contents MFP Option Stability Information Page English United States Government Rights Static sensitivity notice Selecting a location for your printer and MFP MFP configurationsOverview Turning off the printerInput options Output options Other options Customizing your MFP optionSetting up furniture Unboxing the printer Installing optional drawersInstalling the duplex unit Removing the print cartridge packaging Preparing the printerRemoving the print cartridge packaging Preparing the printer Loading paper Installing an optional operator panel cover Attaching a scanner shelf Installing the scanner on a scanner shelf Installing the scanner on a scanner shelfInstalling the scanner on a scanner shelf Unlocking the scanner Installing the scanner without a scanner shelfInstalling the scanner without a scanner shelf Installing output options Accessing the printer system board Installing memory, option, or interface cardsInstalling a memory card Installing an option-added firmware card Installing the interface card Installing memory, option, or interface cards Replacing the access cover plate Attaching cables to the printer and the scanner Attaching cables to the printer and the scanner Attaching cables to the printer and the scanner Installing drivers Installing drivers for the printer, MFP, and other optionsFax setup Setting up fax and IP addressesAssigning a printer IP address Performing browser fax setup Making a test copy Verifying MFP setupPrinting a menu settings Printing the Help pagesClick Scan Profile Click Create Scan Profile Testing a scan to PC profileGetting more help Solving setup problems