Lexmark 782n setup guide Performing browser fax setup

Page 34

Step 15: Setting up fax and IP addresses

Performing browser fax setup

Note: Configuration is a task usually done by a system support person. If you are prompted for a password during the following instructions, see your system support person for help.

1Type the IP address of the MFP in the URL field of your browser (for example, http://192.168.236.24), and then press Enter.

2Click Configuration.

3Under the MFP heading, click Fax Setup.

4Click Configuration.

If you are changing fax modes, you must click Submit before you can access the configuration page.

Note: During MFP power up, if the print server is configured to use Network Time Protocol (NTP) time, the current date and time are provided. However, you must set the time zone to get the correct time.

5Enter the required FCC information:

•Date and time (current date and time)

•Station name (personal name or company name)

•Station number (fax phone line number)

6Select the Time Zone, such as Eastern (USA and Canada, Eastern Standard Time). This sets the required information.

7Set your options for Rings to Answer, and so on.

8After you finish entering the information, click Submit.

Changing optional settings such as setting up a fax transmission log, creating permanent fax destinations, and enabling the fax server function can be changed through your browser or the MFP control panel.

Note: If your region supports caller ID, you may have to change the default setting. There are two settings available; FSK (pattern 1) and DTMF (pattern 2). Contact your telecommunications company or switch the settings if the MFP does not identify incoming calls.

Fax setup

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents MFP Option Stability Information Page English United States Government Rights Static sensitivity notice Turning off the printer MFP configurationsOverview Selecting a location for your printer and MFPCustomizing your MFP option Input options Output options Other optionsSetting up furniture Installing the duplex unit Installing optional drawersUnboxing the printer Preparing the printer Removing the print cartridge packagingRemoving the print cartridge packaging Preparing the printer Loading paper Installing an optional operator panel cover Attaching a scanner shelf Installing the scanner on a scanner shelf Installing the scanner on a scanner shelfInstalling the scanner on a scanner shelf Installing the scanner without a scanner shelf Unlocking the scannerInstalling the scanner without a scanner shelf Installing output options Installing memory, option, or interface cards Accessing the printer system boardInstalling a memory card Installing an option-added firmware card Installing the interface card Installing memory, option, or interface cards Replacing the access cover plate Attaching cables to the printer and the scanner Attaching cables to the printer and the scanner Attaching cables to the printer and the scanner Installing drivers for the printer, MFP, and other options Installing driversSetting up fax and IP addresses Fax setupAssigning a printer IP address Performing browser fax setup Printing the Help pages Verifying MFP setupPrinting a menu settings Making a test copyTesting a scan to PC profile Click Scan Profile Click Create Scan ProfileSolving setup problems Getting more help
Top Page Image Contents