Installing the printer on the network

Configuring WEP encryption

1Enter the appropriate WEP key(s). WEP encryption requires at least one WEP key, but can include up to four.

2Select the default WEP transmit key.

3Click OK to return to the Advanced Mode home screen, and proceed to step 8 of the advanced mode instructions.

Configuring WPA Personal encryption

1Enter the appropriate Pre-Shared key.

2Click OK to return to the Advanced Mode home screen, and proceed to step 8 of the advanced mode instructions.

Creating a certificate request

Some authentication mechanisms require certificates to work properly. In situations in which a signed certificate is required, a certificate request must be initiated in order to create a new signed certificate.

To create a certificate request

1Go to Certificates Æ Create Certificate Request.

2Enter the appropriate certificate information.

3Click Browse to navigate to the location where the certificate is to be saved.

4Click OK to return to the Advanced Mode home screen, and proceed to step 7 of the advanced mode instructions.

Installing the printer on the network

Once the print server has been configured, use the printer drivers or printer software CD that came with the printer to install the network printer on the network.

•Make sure that your printer drivers CD or printer software CD is inserted into the computer you want to install the printer on.

•When installing the printer, follow the Suggested Æ Network installation path. This process can vary between different printers.

For more information on installing the printer on the network, see the printer documentation.

Installing the printer on the network