Lexmark manual Troubleshooting, MarkNet N8050 Utilities CD does not launch automatically

Page 18

4 Troubleshooting

Use this section to solve problems you may have while setting up the internal wireless print server.

The MarkNet N8050 Utilities CD does not launch automatically

1Close all open software programs.

2Reinsert the MarkNet N8050 Utilities CD. If the setup utility screen appears, continue your setup instructions.

If the setup utility screen does not appear, do the following: a From your desktop, double-click My Computer.

b Double-click the CD-ROM drive icon. c If necessary, double-click setup.exe.

The Wireless Setup Utility was not able to communicate with the printer

Verify that the printer has power.

Verify that the USB cable is properly connected to both the computer and the printer.

Connect the printer to a different USB port on your computer.

If repeated attempts to connect the printer to the computer using a USB cable fail, preventing you from using the Wireless Setup Utility, you can use the Manual configuration method to configure the print server for use on the network.

The network key was invalid

A network key is like a password and should follow this criteria:

WEP key

Exactly 5 or 13 ASCII characters Or

Exactly 10 or 26 Hexadecimal characters (using A—F and 0—9 only)

Troubleshooting

14

Image 18
Contents MarkNet N8050 Internal Wireless Print Server Edition May Contents Glossary Getting started Unpacking your print serverSafety information Attaching the wireless print server antennaMinimum requirements for setup Wireless network settingsConfiguringserver the internal wireless print Configuration overviewUsing the Wireless Setup Utility Click Install MarkNet N8050 UtilitiesSelect either Wizard Mode or Advanced Mode For Wizard Mode Wireless Configurations Found on Your ComputerWireless Networks Available in Your Area Entering alternate network settings For Advanced Mode Configuring the authentication mechanism Click Install CA Certificate Click Install Signed CertificateInstalling the printer on the network Configuring WEP encryptionInstalling a network printer on additional network computers Changingsettings the wireless print server Finding the network printer IP addressClick Launch Web Troubleshooting MarkNet N8050 Utilities CD does not launch automaticallyNetwork key was invalid Printer was unable to join the network My network printer does not print Manual configuration Configuring the print server in Ad-Hoc modeConfiguring the print server in Ad-Hoc mode Certificate management Click Certificate ManagementTo request and install a new Signed Certificate Click Update Certificate Signing RequestGlossary PeapGlossary Glossary Statement of Limited Warranty for MarkNet N8050 Certification ID W003404