Certificate management

9Under Network/Ports, click Wireless.

10Change the listed network settings to match the wireless network that the printer will be used on, including:

•SSID

•BSS type

•Channel Number (Ad-Hoc only)

•Wireless Security Mode

•Encryption Mode (If applicable)

The SSID must be entered exactly as it is used on the network. SSIDs are case-sensitive, so if the SSID is entered incorrectly, the print server will not be able to communicate on the network, and the configuration process must be repeated.

Note: If WEP is selected as the security mode, click Advanced Settings for the option to enter additional WEP security keys.

11Click Submit.

12Restore the computer’s wireless network settings back to the original values that were recorded in step 3.

Some authentication mechanisms associated with the 802.1x–RADIUS Wireless Security mode require the use of either a CA Certificate (PEAP and EAP-TTLS), or both a Signed Certificate and a CA Certificate (EAP-TLS).

To manage certificates for use with 802.1x–RADIUS

1From the print server embedded Web page, click Configuration on the left side of the page.

2Click Certificate Management.

3Complete the appropriate management option(s).

4Return to the embedded Web page home screen and go to step 7 of the Configuring the print server in Ad-Hoc mode instructions.

To install a new CA Certificate

1Under Certificate Configuration, click Install A New Certificate Authority Certificate.

2Browse to the correct certificate location, and click Submit.