Lexmark 238 manual Tips on choosing the right print media, Paper, Preprinted forms and letterhead

Page 18

Tips on choosing the right print media

Tips on choosing the right print media

Selecting the right paper or other media reduces printing problems. For best print quality, try a sample of the paper or other media you are considering before buying large quantities.

See the Card Stock & Label Guide available on our Lexmark Web site at www.lexmark.com for more information about which paper provides optimum results for your printing environment.

Paper

•For the best print quality, use 20 lb (75 g/m2) xerographic, grain long paper.

The printer can automatically feed paper weights from 60 to 90 g/m2 (16 to 24 lb bond) grain long. Paper lighter than 60 g/m2 (16 lb) might not be stiff enough to feed properly, causing jams. Paper heavier than 90 g/m2 (24 lb) should be fed through the optional 550-sheet tray or the manual feeder.

•The laser printing process heats paper to high temperatures of 170°C (338°F) for non-MICR applications. Use only paper able to withstand these temperatures without discoloring, bleeding, or releasing hazardous emissions. Check with the manufacturer or vendor to determine whether the paper you have chosen is acceptable for laser printers.

Preprinted forms and letterhead

•Use only forms and letterhead printed using an offset lithographic or engraved printing process.

•Choose papers that absorb ink, but do not bleed.

•Avoid papers with rough or heavily textured surfaces.

Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand temperatures of 170°C (338°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation-set or oil-based should meet these requirements; latex inks might not. If you are in doubt, contact your paper supplier.

Preprinted papers such as letterhead must be able to withstand temperatures up to 170°C (338°F) without melting or releasing hazardous emissions.

Transparencies

•Use transparencies designed specifically for laser printers. Transparencies must be able to withstand temperatures of 170°C (338°F) without melting, discoloring, offsetting, or releasing hazardous emissions.

We recommend Lexmark laser printer transparencies: part number 70X7240 for letter size transparencies; part number 12A5010 for A4 size transparencies.

•To prevent print quality problems, avoid getting fingerprints on the transparencies.

Envelopes

•Use envelopes made from 24 lb (90 g/m2) bond paper.

•Do not use envelopes that:

–Have excessive curl

–Are stuck together

–Are damaged in any way

–Contain windows, holes, perforations, cutouts, or embossments

–Use metal clasps, string ties, or metal folding bars

–Have postage stamps attached

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents E238 Edition notice Licensing noticeUnited Kingdom Telecommunications Act Conventions Safety informationSafety information Laser noticePrinter energy consumption Printer energy consumptionStatement of Limited Warranty Statement of Limited WarrantyLimitation of liability Contents Contents Printing tasksTroubleshooting Printer overview Printer overview Press and release ContinueInstalling printer software using the drivers CD Installing software for local printingBefore installing printer software Installing printer software through the Add Printer WizardMacintosh Installing optional printer softwareLocal Printer Settings Utility Macintosh`Creating a desktop printer icon Mac OS UNIX/LinuxUNIX/Linux For Mac OS 9.0 Open Apple LaserWriterPage Print media tasks and tips What types of print media can be loaded?Where can print media be loaded in the printer? Where can print media be loaded in the printer?Preprinted forms and letterhead Tips on choosing the right print mediaPaper TransparenciesLabels Storing paper Tips on storing print media and suppliesCard stock Storing suppliesTips on preventing jams Tips on preventing jamsHow to load the 250-sheet tray How to load the 250-sheet trayHow to load the 250-sheet tray Extending the tray for legal or folio size paper How to load the 250-sheet tray Attaching the dust cover How to load the manual feeder How to use the rear exitHow to load the manual feeder How to use the rear exit How to clear paper jams How to clear paper jamsHow to clear paper jams How to clear paper jams How to manually feed a print job Printing tasksHow to manually feed a print job How to print on both sides of the paper manual duplex How to print on both sides of the paper manual duplexHow to print on both sides of the paper manual duplex How to print multiple page images on one page N-up printing How to print multiple page images on one page N-up printingHow to print a booklet How to print a bookletHow to print a poster How to print a posterUsing an overlay How to print on letterheadHow to print using an overlay or a watermark How to print on letterheadUsing a watermark How to print using an overlay or a watermarkClick Watermark From the printer operator panel How to cancel a print jobCanceling a job from a Macintosh computer From a Windows computerHow to install options How to access the system boardHow to access the system board How to add a memory card How to add a memory cardRecognizing installed options See Recognizing installed optionsUsing the operator panel Press and hold CancelOverview of the operator panel = On = Blinking Understanding the operator panel lightsUnderstanding the operator panel lights Close door Load mediaSee Secondary errors on page 47 for more information Secondary errors = On Empty = OffOperator panel codes Ready / Power SaverPrinter Setup Utility on Primary codesOperator panel codes Busy Press and release CancelPress and hold Cancel To reset the printer Hex Trace ReadyFlushing / Resolution reduced Operator panel codes WaitingOperator panel codes Not ready Close doorOperator panel codes Load media Load manual feederOperator panel codes Print side two of a duplex job Toner lowOperator panel codes Photoconductor kit life warning Replace photoconductorContinue-On Toner Low/Replace PC Kit-Blink Error-Blink Operator panel codes Change invalid toner cartridge Cartridge region mismatchCancel job / Reset printer Operator panel codes Service error Printer errorPress Continue Operator panel codes Paper jam printer error Secondary error codes on page 61 for more informationCleared from the paper path Secondary error codes Errors onOperator panel codes Paper jam at the input sensor Paper jam in the manual feederPaper jams as a printed job exits the printer Operator panel codes Paper jam in Tray ComplexPress Cancel To cancel the print job Operator panel codes Insufficient printer memoryInsufficient collation area Operator panel codes Font error Host interface disabledOperator panel codes Memory full Short paperOperator panel codes Invalid engine code Understanding the printer configuration menus Printing the Printer Settings Configuration sheetToner Low/Replace PC Kit Load Paper Configuration menus overviewConfiguration menus overview ContinueSetup menu Parallel menuUSB menu Utilities menuSoftware tasks How to print the menu settingsHow to print a test WindowsUsing the Local Printer Setup Utility Using the Local Printer Setup UtilityHow to conserve supplies Supplies informationWhat supplies do I need and how do I order them? How to know when you need new supplies How to know when you need new suppliesChecking the toner and photoconductor levels Recognizing the operator panel light sequences How to change a toner cartridge How to change a toner cartridgeHow to change a toner cartridge How to change a toner cartridge Recycling Lexmark products Recycling Lexmark productsHow to change a photoconductor kit How to change a photoconductor kitHow to change a photoconductor kit How to change a photoconductor kit General problems Click Printer SoftwareGeneral problems Have another cartridge toPrint quality problems Print quality problemsPrint too light When you handle the sheetsPrint irregularities Print too darkIncorrect margins Ghost ImagesUneven printing Skewed printSolid black pages Paper curls badly once it printsExits to the bin How to clean the printhead lens Print quality problems Close the front cover Turn the printer on Index Index Transparencies

238 specifications

The Lexmark 238 is a versatile and efficient monochrome laser printer designed to meet the demands of both small businesses and workgroups. Renowned for its reliability and performance, the Lexmark 238 stands out with several key features and technologies that enhance productivity and streamline workflows.

One of the standout characteristics of the Lexmark 238 is its fast printing speed. Capable of delivering prints at speeds of up to 36 pages per minute, this printer ensures that users can quickly produce high-quality documents without long wait times. This efficiency is further enhanced by its first-page-out time of approximately 6.5 seconds, allowing for rapid printing of one-off documents when needed.

The Lexmark 238 boasts a remarkable input capacity, with an adjustable paper tray that can accommodate various media sizes and types, including letter, legal, and envelopes. With a standard capacity of up to 250 sheets, along with the option to add additional trays, it can handle larger print jobs effortlessly. Additionally, its automatic duplexing feature allows users to print on both sides of the paper, promoting resource conservation and reducing overall printing costs.

In terms of connectivity, the Lexmark 238 offers multiple options, including USB, Ethernet, and wireless capabilities, making it easy to integrate into various office environments. Users can print directly from their mobile devices and cloud applications, thanks to compatibility with mobile printing technologies such as Apple AirPrint, Google Cloud Print, and Lexmark's Mobile Print app. This flexibility is crucial in today’s fast-paced work settings.

Security is also a significant focus for the Lexmark 238, featuring a range of built-in security assets that protect sensitive data and control access. Users can restrict access to printer functions and ensure that sensitive documents are only seen by authorized personnel.

The Lexmark 238 utilizes advanced printing technologies that enhance its performance and reliability. With its high-impact toner cartridges, the printer produces sharp text and crisp graphics, ensuring professional-quality outputs every time. Furthermore, the printer's durable design and robust construction minimize the likelihood of downtime, allowing teams to maintain productivity.

Overall, the Lexmark 238 combines speed, efficiency, connectivity, and security in a compact design that is easily adaptable to various workplace scenarios. Its blend of innovative features and solid performance makes it a valuable addition to any business looking to streamline its printing processes and improve overall efficiency.
Top Page Image Contents