Lexmark 238 manual General problems, Have another cartridge to

Page 86

General problems

Problem / Question

Solution / Answer

How do I restore the

Sometimes restoring the printer to the original factory default settings solves formatting

factory defaults?

problems. To reset the factory defaults:

 

1

Turn off the printer.

 

2

Open the front cover.

 

3

Press Continue as you turn the printer back on.

 

4

Keep pressing Continue until the Error light comes on, then release the Continue button.

 

5

Close the front cover.

 

6

As the printer warms up, the top four lights come on.

 

7

Press Cancel.

 

8

Press Continue until the operator panel cycles through all of the lights.

 

9

When the top four lights come on, release the Continue button.

 

10Turn the printer off and back on.

 

11Factory defaults have been reset.

 

 

The toner low light

Yes, you can still print. To extend the life of the toner cartridge somewhat, remove the

sequence is on, but I don’t

cartridge, firmly shake it from side to side and front to back several times to use the remaining

have another cartridge to

toner, then insert it back into the printer. Repeat this procedure multiple times. If print remains

put in yet. Can I still print

faded, replace the toner cartridge.

with the low cartridge?

 

 

 

 

The printer seems to print

This is normal. The printer sometimes prints at a slightly slower speed when feeding print

slower when using the

media from the manual feeder.

manual feeder.

 

 

 

 

I want to manually duplex

The problem is that when the printer tries to manually duplex a print job, it always prints side 2

card stock, but I’m having

from Tray 1. However, Tray 1 does not support card stock.

trouble getting it to feed.

To achieve the desired effect, you have to send both pages of the print job as separate jobs.

 

 

After the first page has printed, reload the card stock in the manual feeder. Load the card

 

stock in the feeder with the already-printed side down, with the top of the sheet first.

 

 

Paper stacks poorly in the

Extend the paper

output bin.

support on the

 

output bin.

 

 

 

86

Page 85 Page 87
Image 86
Page 85 Page 87
Contents E238 Edition notice Licensing noticeUnited Kingdom Telecommunications Act Conventions Safety informationSafety information Laser noticePrinter energy consumption Printer energy consumptionStatement of Limited Warranty Statement of Limited WarrantyLimitation of liability Contents Contents Printing tasksTroubleshooting Printer overview Printer overview Press and release ContinueInstalling printer software using the drivers CD Installing software for local printingBefore installing printer software Installing printer software through the Add Printer WizardMacintosh Installing optional printer softwareLocal Printer Settings Utility Macintosh`Creating a desktop printer icon Mac OS UNIX/LinuxUNIX/Linux For Mac OS 9.0 Open Apple LaserWriterPage Print media tasks and tips What types of print media can be loaded?Where can print media be loaded in the printer? Where can print media be loaded in the printer?Preprinted forms and letterhead Tips on choosing the right print mediaPaper TransparenciesLabels Storing paper Tips on storing print media and suppliesCard stock Storing suppliesTips on preventing jams Tips on preventing jamsHow to load the 250-sheet tray How to load the 250-sheet trayHow to load the 250-sheet tray Extending the tray for legal or folio size paper How to load the 250-sheet tray Attaching the dust cover How to load the manual feeder How to load the manual feederHow to use the rear exit How to use the rear exit How to clear paper jams How to clear paper jamsHow to clear paper jams How to clear paper jams How to manually feed a print job Printing tasksHow to manually feed a print job How to print on both sides of the paper manual duplex How to print on both sides of the paper manual duplexHow to print on both sides of the paper manual duplex How to print multiple page images on one page N-up printing How to print multiple page images on one page N-up printingHow to print a booklet How to print a bookletHow to print a poster How to print a posterUsing an overlay How to print on letterheadHow to print using an overlay or a watermark How to print on letterheadClick Watermark Using a watermarkHow to print using an overlay or a watermark From the printer operator panel How to cancel a print jobCanceling a job from a Macintosh computer From a Windows computerHow to install options How to access the system boardHow to access the system board How to add a memory card How to add a memory cardRecognizing installed options See Recognizing installed optionsOverview of the operator panel Using the operator panelPress and hold Cancel = On = Blinking Understanding the operator panel lightsUnderstanding the operator panel lights Close door Load mediaSee Secondary errors on page 47 for more information Secondary errors = On Empty = OffOperator panel codes Ready / Power SaverPrinter Setup Utility on Primary codesOperator panel codes Busy Press and release CancelPress and hold Cancel To reset the printer Hex Trace ReadyFlushing / Resolution reduced Operator panel codes WaitingOperator panel codes Not ready Close doorOperator panel codes Load media Load manual feederOperator panel codes Print side two of a duplex job Toner lowOperator panel codes Photoconductor kit life warning Replace photoconductorContinue-On Toner Low/Replace PC Kit-Blink Error-Blink Operator panel codes Change invalid toner cartridge Cartridge region mismatchCancel job / Reset printer Press Continue Operator panel codes Service errorPrinter error Cleared from the paper path Operator panel codes Paper jam printer errorSecondary error codes on page 61 for more information Secondary error codes Errors onOperator panel codes Paper jam at the input sensor Paper jam in the manual feederPaper jams as a printed job exits the printer Operator panel codes Paper jam in Tray ComplexInsufficient collation area Press Cancel To cancel the print jobOperator panel codes Insufficient printer memory Operator panel codes Font error Host interface disabledOperator panel codes Memory full Short paperOperator panel codes Invalid engine code Understanding the printer configuration menus Printing the Printer Settings Configuration sheetToner Low/Replace PC Kit Load Paper Configuration menus overviewConfiguration menus overview ContinueSetup menu Parallel menuUSB menu Utilities menuSoftware tasks How to print the menu settingsHow to print a test WindowsUsing the Local Printer Setup Utility Using the Local Printer Setup UtilityWhat supplies do I need and how do I order them? How to conserve suppliesSupplies information Checking the toner and photoconductor levels How to know when you need new suppliesHow to know when you need new supplies Recognizing the operator panel light sequences How to change a toner cartridge How to change a toner cartridgeHow to change a toner cartridge How to change a toner cartridge Recycling Lexmark products Recycling Lexmark productsHow to change a photoconductor kit How to change a photoconductor kitHow to change a photoconductor kit How to change a photoconductor kit General problems Click Printer SoftwareGeneral problems Have another cartridge toPrint quality problems Print quality problemsPrint too light When you handle the sheetsPrint irregularities Print too darkIncorrect margins Ghost ImagesUneven printing Skewed printExits to the bin Solid black pagesPaper curls badly once it prints How to clean the printhead lens Print quality problems Close the front cover Turn the printer on Index Index Transparencies

238 specifications

The Lexmark 238 is a versatile and efficient monochrome laser printer designed to meet the demands of both small businesses and workgroups. Renowned for its reliability and performance, the Lexmark 238 stands out with several key features and technologies that enhance productivity and streamline workflows.

One of the standout characteristics of the Lexmark 238 is its fast printing speed. Capable of delivering prints at speeds of up to 36 pages per minute, this printer ensures that users can quickly produce high-quality documents without long wait times. This efficiency is further enhanced by its first-page-out time of approximately 6.5 seconds, allowing for rapid printing of one-off documents when needed.

The Lexmark 238 boasts a remarkable input capacity, with an adjustable paper tray that can accommodate various media sizes and types, including letter, legal, and envelopes. With a standard capacity of up to 250 sheets, along with the option to add additional trays, it can handle larger print jobs effortlessly. Additionally, its automatic duplexing feature allows users to print on both sides of the paper, promoting resource conservation and reducing overall printing costs.

In terms of connectivity, the Lexmark 238 offers multiple options, including USB, Ethernet, and wireless capabilities, making it easy to integrate into various office environments. Users can print directly from their mobile devices and cloud applications, thanks to compatibility with mobile printing technologies such as Apple AirPrint, Google Cloud Print, and Lexmark's Mobile Print app. This flexibility is crucial in today’s fast-paced work settings.

Security is also a significant focus for the Lexmark 238, featuring a range of built-in security assets that protect sensitive data and control access. Users can restrict access to printer functions and ensure that sensitive documents are only seen by authorized personnel.

The Lexmark 238 utilizes advanced printing technologies that enhance its performance and reliability. With its high-impact toner cartridges, the printer produces sharp text and crisp graphics, ensuring professional-quality outputs every time. Furthermore, the printer's durable design and robust construction minimize the likelihood of downtime, allowing teams to maintain productivity.

Overall, the Lexmark 238 combines speed, efficiency, connectivity, and security in a compact design that is easily adaptable to various workplace scenarios. Its blend of innovative features and solid performance makes it a valuable addition to any business looking to streamline its printing processes and improve overall efficiency.
Top Page Image Contents