Emerson Packaged Drives and Engineered Systems 331, Drive Amp Rating Armature, Dynamic Braking DB

www.emersonct.com

800-533-0031

Definition - DC StandardPak Order Code Configurator

Item	Description
Enclosure Style	P = Panel allows additional options to be added to the Quantum III module.
P = Panel	E = The enclosure option is a UL1 rated, ventilated Nema -12 (PPBF), positive pressure blown and filtered.
E = Enclosure	14 gauge steel enclosure.
Drive Type	N for Non-regenerative DC drive or R for Regenerative DC drive. Regenerative provides FWD and REV direction with a
N = Non-regenerative	controlled braking action. Non-Regenerative is unidirectional and will have a coast to a stop action,
R = Regenerative	unless dynamic braking is used.
Voltage Rating
8 = 208 VAC
2 = 240 VAC	240 VAC for 240 VDC motor armature.
3 = 380 VAC
4 = 480 VAC	480 VAC for 500 VDC motor armature.
Drive Amp Rating - Armature	Motor hp ratings are based on typical motor current ratings. Actual motor currents and the type of applications should
	be reviewed before selecting drive size.
Dynamic Braking (DB)	QuantumPak supplied with DC contactor (B), MentorPak supplied with AC contactor (A) as standard. Consult Factory
	for drives 210A or above with DC contactor.
A = AC Input Contactor
	A = AC Input Contactor (210-825A)
B = DC Contactor with DB pole
	B = DC Contactor with DB pole (38-172A)
Input Power Disconnect	1 – CB with through the door operator, Thermal-magnetic overload protection and main circuit disconnect.
0 = None	Includes drive input semiconductor fuses.
1 = Circuit breaker (CB)	2 – NFD with through the door operator, main circuit disconnect. Includes drive input
2 = Non-fused disconnect (NFD)	semiconductor fuses.
ADDITIONAL OPTIONS
Item	Description
Blower Motor Starter	Select the correct blower motor amps. The value must be selected to complete
1 to 7	the Order Code for order entry.
Door Mounted Devices	To meet UL508A for industrial locations the E-Stop push button is required with door mounted devices.
E = E-Stop, Start PB, Stop PB, Speed Pot	E = E-Stop, Start, & Stop Push buttons, Speed Potentiometer
F = Fwd/Rev Switch 5	F = Forward / Reverse Switch - FWD/REV Selector Switch applies to regenerative drives only.
H = HOA Selector Switch	H = Hand (Manual) - Off - Automatic Switch
J = Jog PB
	J = Jog Push button
K = Keypad (CTVue-303)
	K – Keypad (CTVUE-303 with standard program, mounted and wired on the door)
P = Drive Power “ON” PL
R = Reset PB	P = Drive Power “ON” pilot light indicates drive running.
V = Analog Armature Ammeter & Voltmeter	R = Drive can be reset by means of the door mounted push button (PB), Remote (PB) or (PB) on the cover of the drive.
W = Analog Field Ammeter & Voltmeter	V = Analog Armature Ammeter (150%) & Voltmeter (100%).
	W = Analog Field Ammeter (100%) & Voltmeter (100%)
Encoder Cable	The drive has a DB9 connector for encoder feedback. The encoder cable is supplied with the DB9 connector wired to a
Y = Encoder cable	terminal block.

DC MentorPak

For options not included in the Order Code configurator, please consult factory.

331