Sharp AL-1255, AL-1555, AL-1456, AL-1045 Power off methods, Initial settings of operation panel

Initial settings of operation panel

When the unit power is on, the operation panel will revert to the initial settings when the time set with the "Auto clear time" setting (p.54) elapses after a copy or scanner job is finished, or when the clear () key is pressed twice.

The initial settings of the operation panel are shown below.

AL-1555

141 A5 A4

86 A4 B5

70 A4 A5

2

"0" is displayed in the display.

When copying is begun in this state, the settings in the following table are used.

Copy quantity	1 copy
Exposure adjustment	Auto
Zoom	100%
AL-1555 only
Original to copy	The "Original to copy" indicator does
	not illuminate. (One-sided copying
	only)
Tray	Paper tray 1

Power off methods

If not used for a certain period of time, the unit will automatically enter auto power shut-off mode (p.54) in order to minimize power consumption. In cases where the machine will not be used for a long time, turn off the power switch and remove the power cord from the outlet.

13