Sharp AL-1255 Set The Copy Quantity, Exposure Adjustment/Photo Copying, Exposure adjustment

SET THE COPY QUANTITY

Set the number of copies using the two copy quantity (, ) keys when copying from the original table or copying from SPF/RSPF.

•Press the clear () key to clear an entry if a mistake is made.

• A single copy can be made with the initial setting, i.e., when "0" is displayed.

• Press the right copy quantity key to set the unit digit from 0 to 9. This key will not change the tens digit.

• Press the left copy quantity key to set the tens digit from 1 to 9.

Tens digit Unit digit

EXPOSURE ADJUSTMENT/PHOTO COPYING

Exposure adjustment

Copy density adjustment is not required for most originals in the automatic exposure mode. To adjust the copy density manually or to copy photographs, the exposure level can be adjusted in five steps manually.

The copy resolution used for AUTO and manual (	) mode can be	5
changed. (p.55)

1Press the exposure mode selector key to

select the manual ( ) mode or photo ( ) mode.

2Use the light ( ) and dark ( ) keys to

adjust the exposure level. If exposure level 2 is selected, the two left-handmost indicators for that level will light up simultaneously. Also, if level 4 is selected, the two right-handmost indicators for that level will light up simultaneously.

49