Xerox manual Calibrate Margins, Adjusting Side 1 Margins, Phaser 6250 Color Laser Printer 4-18

Print-Quality Problems

Calibrate Margins

Use the Calibrate Margins menu to adjust the printed area to fit within the edges of the paper. The imaging area appears as a dashed rectangle; the printer does not print outside this rectangle.

Adjusting Side 1 Margins

1.At the printer’s front panel, select Troubleshooting, then press the OK button.

2.Select Print Quality Problems, then press the OK button.

3.Select Calibrate Margins, then press the OK button to print the page.

4.To move Side 1 “A” margin:

a.Select Adjust Side 1 “A” Margin, then press the OK button.

b.Press the Up arrow to move the margin as illustrated.

5.To move Side 1 “B” margin:

a.Select Adjust Side 1 “B” Margin, then press the OK button.

b.Press the Up arrow to move the margin as illustrated.

You can adjust the settings from -40 to +40 units. The thickness of the rectangle’s dashed line is 1 unit. 12 units move the rectangle 1 mm. The maximum distance the rectangle can be moved (-40 to +40) is 6.7 mm.

A+

Phaser

Calibrate Margins Calibrate Margins

Phaser

Phaser

Calibrate Margins

B-

A-

Phaser

Calibrate Margins

B+

To move up: increase the Adjust Side 1 “A” margin setting.

To move down:	To move left: decrease	To move right: increase
decrease Adjust Side 1	Adjust Side 1 “B” margin	Adjust Side 1 “B” margin
“A” margin setting.	setting.	setting.

Phaser® 6250 Color Laser Printer

4-18