Xerox 6250 manual Fire Fighting Measures, Accidental Release Measures, Handling and Storage

Eyes: If particles get into eye, flush thoroughly with water. Seek medical attention if symptoms occur.

Skin: Wash thoroughly with soap and water. Seek medical attention if symptoms occur.

Ingestion: Dilute stomach contents with several glasses of water. Seek medical attention if symptoms occur.

Section 5–Fire Fighting Measures

Flash Point: Not applicable

Fire and Explosion Hazards: Toner is a combustible powder. Like most organic powders, it can form explosive mixtures when dispersed in air.

Extinguishing Methods: Water, dry chemical, carbon dioxide, or foam.

Fire Fighting Information: Avoid inhalation of smoke. As for any fire, wear protective clothing and self-contained breathing apparatus.

Section 6–Accidental Release Measures

Spill or leak: Sweep up or vacuum spilled materials and carefully transfer into sealable waste container. Sweep slowly to minimize generation of dust during clean up. If a vacuum is used, the motor must be rated as dust tight. A conductive hose bonded to the machine should be used to reduce static buildup. Clean up residue if necessary with soap and cold water. Wash or dry clean garments after removing loose toner.

Section 7–Handling and Storage

Handling: No special precautions, when used as intended.

Storage: Avoid high temperatures.

Section 8–Exposure Control - Personal Protection

No special personal protection indicated, when used as intended in Xerox Phaser color printers.

Threshold Limit Value (TLV): 10 mg/m3 (total dust)

Permissible Exposure Limit (PEL): 15 mg/m3 (total dust); 5 mg/m3 (respirable dust)

Short Term Exposure Limit (STEL): None established

Ceiling Limit: None established

Xerox Exposure Limit (XEL): 2.5 mg/m3 (total dust); 0.4 mg/m3 (respirable dust)

Section 9–Physical and Chemical Properties

Appearance/Odor: Black, blue, red, or yellow powders/faint odor

Boiling Point: Not applicable

Phaser® 6250 Color Laser Printer

E-3