Xerox 6250 manual Windows NT, Copyright 2003 Xerox Corporation. All Rights Reserved 3-21

Phaser® 6250 Color Laser Printer

Windows NT 4.x

This topic includes:

■"Preliminary Steps" on page 3-21

■"Quick CD-ROM Install Steps" on page 3-21

■"Other Methods of Installation" on page 3-22

■"Windows NT 4.x Troubleshooting (TCP/IP)" on page 3-25

Preliminary Steps

These preliminary steps must be performed for all printers:

1.Verify that the printer is plugged in, turned on, and connected to an active network.

2.Verify that the printer is receiving network traffic by monitoring the LED’s on the back of the printer or on the CentreDirect External Print Server. When the printer is connected to a functioning network and receiving traffic, its link LED is green, and its amber traffic LED is flashing rapidly.

3.Proceed to “Quick CD-ROM Install Steps” or “Other Methods of Installation” for the installation method desired.

4.Print a “Configuration Page” and keep it for reference.

Quick CD-ROM Install Steps

1.Insert the Printer Installer and Utilities CD-ROMinto the computer’s CD-ROM drive. If your PC is set to autorun, the installer launches automatically. If it does not launch, do the following:

a.Click Start, then click Run.

b.In the Run window, type: <CD drive>:\INSTALL.EXE.

2.Select your desired language from the list.

3.Select Install Printer Driver.

4.Click I Agree to accept the Xerox Software License Agreement.

5.In the Select Printer dialog box, the default Use Walk-Up Technology (recommended for network printers) is selected. Click Next.

6.Follow the Use Walk-Up Technology instructions displayed.

7.Click Exit Program.

Note

If the Walk-Up Technology dialog box remains onscreen after you have completed Steps 1–6, click the Back button, then click Select from the following discovered printers. Follow the onscreen prompts to complete the installation procedure.

Copyright © 2003 Xerox Corporation. All Rights Reserved.

3-21