Xerox 6250 manual Macintosh, Requirements, Enabling and Using EtherTalk, Mac OS, Open Print Center

Phaser® 6250 Color Laser Printer

Macintosh

This topic includes:

■"Requirements" on page 3-32

■"Enabling and Using EtherTalk" on page 3-32

■"Enabling and Using TCP/IP" on page 3-33

■"Quick Install Steps for Mac OS 9.x" on page 3-33

■"Quick Install Steps for Mac OS X, Version 10.1" on page 3-35

■"Quick Install Steps for Mac OS X, Version 10.2 (Rendezvous)" on page 3-36

■"Macintosh Troubleshooting (Mac OS 9.x, Mac OS X, Versions 10.1 and 10.2)" on page 3-37

Requirements

■A workstation with the appropriate printer driver installed.

■A working knowledge of the operating system (System 9.0+ or higher) being used on the workstation.

■Proper cabling to connect the printer to the network.

Enabling and Using EtherTalk

If you use EtherTalk, Macintosh computers do not require IP addresses.

1.Open the AppleTalk Control Panel. Verify that the Ethernet port is the selected network port.

2.Insert the Printer Installer and Utilities CD-ROM into the computer’s CD-ROM drive. If your PC is set to autorun, the installer launches automatically.

3.Double-click the installer on the Printer Installer and Utilities CD-ROMto install the printer driver.

Mac OS 9.x

1.Open the Chooser, then click the LaserWriter printer driver.

2.Select the printer.

3.Click Create to create the desktop printer.

Mac OS X, Versions 10.1 and 10.2

1.Open Print Center.

2.Click Add Printer, then select the printer.

3.Click Add.

Note

For more information, go to www.xerox.com/officeprinting/infoSMART to view Document # 2562.

Copyright © 2003 Xerox Corporation. All Rights Reserved.

3-32