Xerox 6250 manual Microsoft IPP Port, In the Add Xerox TCP/IP Port dialog box

Windows 2000, Windows XP, and Windows Server 2003

Configuring the TCP/IP Printer Port

The Xerox TCP/IP Printer Port Wizard guides you step-by-step through the following procedures:

■Choosing a name for the new port

■Identifying a printer by its DNS Name or IP Address

■(Alternatively) Identifying a printer using the automatic Printer Discovery feature

To install the printer port:

1.Click Next to proceed with the port installation. The wizard verifies the port name and printer address, then configures the remaining port settings for you. Any errors detected in printer identification are displayed in a dialog box requesting Additional Information.

2.In the Add Xerox TCP/IP Port dialog box;:

■Enter a unique name for the port being added in the Enter a Port Name section.

■Enter the printer’s host name or IP Address in the Enter a Printer Name or IP Address section.

3.Click Next.

Note

To locate Xerox printers on your local area network, select Auto Printer Discovery, then click Refresh. The Xerox TCP/IP Port Monitor searches the network for Xerox printers and displays them in a list. Select the desired printer from the list, then click OK.

Completing the Printer Port TCP/IP Setup

After the port settings have been configured and verified, a Completing dialog box appears summarizing all of the settings. You can change or select printer port settings.

1.Select one of these options:

■Click Finish to complete the printer port setup.

■Click Back to change the settings. When you have completed the changes, click Finish to complete the printer-port setup.

2.Click OK to exit Printer Properties.

Microsoft IPP Port

Follow these steps to obtain the printer’s URL and create an Internet Printing Protocol (IPP) printer.

Phaser® 6250 Color Laser Printer

3-18