Xerox Phaser 6250 Color Laser Printer A-4, Moving the Printer, Printing Safety Guidelines

Moving the Printer

The printer is heavy and must be lifted by two people. The illustration below demonstrates the proper technique for lifting the printer.

37 kg

80 lbs.

6250-070

Follow the recommended procedure when moving the printer from one location to another. Information about moving your printer is included in the repackaging kit. You can order the kit from www.xerox.com/officeprinting/6250supplies or contact your local Xerox service representative. For additional instructions about repackaging the printer go to Setup/Other Resources/Instruction Sheets on the User Documentation CD-ROM.

■Always use two people to lift the printer.

■Always turn off the printer using the power switch and unplug all cables and cords.

■Always lift the printer from the designated lift points.

■Do not place any food or liquids on the printer.

■Failure to repackage the printer properly for shipment can result in damage to the printer not covered by the warranty, service agreement, or Total Satisfaction Guarantee.

■Damage to the printer caused by improper moving is not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee.

Warning

Avoid touching areas inside the printer that are labeled with a warning symbol. These areas may be very hot and can cause personal injury.

Printing Safety Guidelines

■Wait 10-15 seconds between turning the printer off and on.

■Keep hands, hair, neckties, etc., away from the exit and feed rollers.

■Do not remove the paper source tray that you selected in either the printer driver or front panel.

■Do not open the doors.

■Do not move the printer.

Phaser® 6250 Color Laser Printer

A-4