Xerox manual Maintenance, Cleaning the Outside of the Printer, Phaser 6250 Color Laser Printer

Phaser® 6250 Color Laser Printer

Maintenance

This topic includes:

■"Cleaning the Outside of the Printer" on page 4-20

■"Cleaning the Density Sensor" on page 4-21

For safety information, go to Reference/Troubleshooting/User Safety on the User Documentation CD-ROM.

Your printer needs little maintenance to keep it producing quality prints. Certain routine maintenance items need to be ordered occasionally:

■Toner Cartridges (Cyan, Yellow, Magenta, and Black)

■Imaging Unit

■Fuser

■Transfer Roller

■Feed Roller Kit

Access the “Supplies Usage Page” from the printer’s front panel, from CentreWare IS, or print the “Usage Profile” at the printer’s front panel.

Caution

If you attempt to use a non-Xerox toner cartridge, it may not fit properly into the printer. If the cartridge does not fit properly, the printer will be unable to function.

Order extra printer supplies when the printer’s front panel displays a warning that the supply is low or near the end of its life. You must replace the supply when the front panel displays an error message that the supply is empty or at the end of its life.

For information about supplies, go to www.xerox.com/officeprinting/6250supplies. Each supply includes installation instructions with the packaging.

Cleaning the Outside of the Printer

You can clean the outside of the printer with a soft, damp, cloth. You can use a cloth moistened with a mild neutral detergent to remove stains; do not spray detergent directly onto the printer.

Warning

To prevent electric shock, turn the printer off and unplug the power cord from the electrical outlet before cleaning the printer.

Do not use a vacuum cleaner to clean the printer. Do not lubricate the printer with oil.

Copyright © 2003 Xerox Corporation. All Rights Reserved.

4-20