Ultratec Miniprint 425 manual Setting pulse/tone dialing, Setting the number of auto-answer rings

Setting pulse/tone dialing

The Miniprint 425 is set for tone dialing, which is correct for almost all telephone lines. But you can change to pulse dialing if your line does not accept tone dialing.This setting remains changed until you change it again or reset the Miniprint 425 or you lose power. Follow these steps to set pulse dialing:

1.Press the options key ( Ctrl + 3 ).You will see PRINT (UP/LOW) CASE on the display.

2.Press the Return the display.

key until you see USING ( TONE) DIAL on

3.Press the Spacebar to change the option.

4.Press the Esc key to save the new setting and leave options or press the Return key to save and go to the next option.

Setting the number of auto-answer rings

Follow these steps to change the number of auto-answer rings to any number between 2 and 9:

1.Press the options key ( Ctrl + 3 ).You will see PRINT (UP/LOW) CASE on the display.

2.Press the RING (2).

Return

key until the display says AUTO ANSWER

3.Press the Spacebar to choose a number between 2 and 9.

4.Press the Esc key to save the new setting and leave options or press the Return key to save and go to the next option.

Turning off Turbo Code

Follow these steps to turn off Turbo Code:

1.Press the options key ( Ctrl + 3 ).You will see PRINT (UP/LOW) CASE on the display.

2 6 • O P T I O N S