Sharp AR-M160, AR-M205 operation manual Settings for Auditing Mode, Auditing Mode Settings

SETTINGS FOR AUDITING MODE

AUDITING MODE

When auditing mode is enabled, a count is kept of the number of copies made by each account (up to 20 accounts can be established), and the counts can be displayed and totaled as necessary. In auditing mode, the display shows "- - -", and this indicates that a 3-digit account number must be entered in order to use the machine for copying.

The administrator of the machine should complete the following settings:

Note • Enable auditing mode (p.00)

•Store account numbers (p.00)

AUDITING MODE SETTINGS

		Setting codes/
Program		factory default
	Program name	settings	Explanation
number
		(factory default settings
		are indicated in bold)
	Enabling/	0: OFF	Use to enable or disable auditing mode. Auditing
10	disabling
		1: ON	mode is initially disabled.
	auditing mode
11	Account number entry	None	Use to set up account numbers. Up to 20
			accounts can be established.
12	Account number	None	Use to change an account number.
	change
13	Account number	0: Delete single account	Use to delete an account number.	5
	deletion	1: Delete all accounts	A single account number can be deleted, or all
			account numbers at once.
			This displays the number of copies made by
14	Number of copies per	None	each account.
	account		The maximum count is 49,999. If this number is
			exceeded, the count will start over from 0.
	Resetting account	0: Reset single account	Use to reset the copy count of an account to 0.
15			The copy count of a single account or of all
		1: Reset all accounts
			accounts can be reset.

47