Ultratec Miniprint 425 manual Wait for response, Change to other TTY

INTERRUPT.The other person can choose to stop typing and let you go ahead or ignore your interruption and continue.

If you see INTERRUPT on your display while you are typing, it means that the other person wants to interrupt you and start typing.You can choose to stop and let the other person go ahead or continue typing yourself.

Interrupt only works with newer TTYs and when the other person is typing continuously. If the other person does not stop typing when you press Ctrl + I , the other TTY probably does not have the interrupt feature.

You can turn off interrupt so that the other person cannot send an interrupt to you. See Turning off interrupt on page 27.Turning off interrupt does not affect your outgoing interrupts—you can still send an interrupt to the other person.

Wait for response

If the other person tells you to hold and you think it might take a long time before they come back, use the wait-for- response feature.The Miniprint 425 will flash the ring flasher when the other person starts typing again. Follow these steps to turn on wait for response:

1.When you see the other person type HOLD PLEASE or something similar, hold down the Ctrl and Shift keys and press the W key ( Ctrl + Shift + W ).The display says WAITING.

2.When you see the ring flasher flashing, the other person is typing. Continue your conversation.The flashing will stop when you start typing.

Change to other TTY

If you want to change TTYs in the middle of a conversation, you can put the call on hold, go to another TTY, and tell the Miniprint 425 to hang up.You must be using direct connect to use this feature. Follow these steps to use the change-to- other-TTY feature:

C A L L I N G • 1 9