11.Unplug the Miniprint 425 from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a.When the power supply cord or plug is damaged or frayed.
b.If liquid has been spilled into the Miniprint 425.
c.If the Miniprint 425 has been exposed to rain or water.
d.If the Miniprint 425 does not operate normally when the operating instructions are followed.Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the Miniprint 425 to normal operation.
e.If the Miniprint 425 has been dropped and/or damaged.
f.If the Miniprint 425 exhibits a distinct change in performance.
12.Do not use the Miniprint 425 to report a gas leak in the vicinity of the leak.
13.Ultratec recommends plugging your Miniprint 425 into a
Battery safety
Caution: To reduce the risk of fire or injury to persons, read and follow these instructions:
1.Use only the type and size battery specified in the battery instructions for your unit.
2.Do not dispose of the batteries in a fire. Cells may explode. Check local codes for possible special disposal instructions.
3.Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
4.Exercise care in handling batteries in order not to short them with conducting materials such as rings, bracelets, and keys.The battery or conductor may overheat and cause burns.
4 • I M P O R T A N T S A F E T Y I N S T R U C T I O N S
