Printer
The printer does not work.
Be sure the printer is on.You can also try resetting the printer by turning the Miniprint 425 off and on.
The printer works, but it prints too lightly or not at all.
Make sure you have
The printer prints only the bottom half of characters.
The print head should be replaced. Contact your dealer or Ultratec.
On battery power, the printer prints too slowly or lightly.
The batteries are low. Plug in the AC adapter for 24 hours to recharge the batteries.
Power
The batteries run down too soon.
You may not be regularly using your Miniprint 425 on battery power, or the batteries are old. See About the batteries on page 31.
The Miniprint 425 does not turn on when you press the On/Off switch, or the power light blinks even when the AC adapter is plugged in.
Be sure the electrical outlet is working. Be sure you are using the correct AC
The Miniprint 425 works fine in the evening, but does not work during the day.
You may have plugged the AC adapter into a switch- controlled outlet.Try a different outlet that you are sure is not controlled by a switch.
3 4 • C A R E & R E P A I R
