FCC information
The Miniprint 425 has been tested and found to comply with the specifications for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and uses radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the Miniprint 425 and the receiver.
•Connect the Miniprint 425 to an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV
technician for help.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. A label is located on the underside of the Miniprint 425 containing, among other information, an FCC registration number,
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the line may result in the devices not ringing in response to an incoming call. In most, but not all, areas the sum of RENs should not exceed five (5.0). To be certain of the number of devices that
may be connected to a line, as determined by the total RENs, contact the local telephone company. The REN for this product is 1.2B.
Should you experience trouble with this telephone equipment, please contact:
Ultratec National Service Center
5901 Research Park Blvd.
Madison, WI 53719
email: service@ultratec.com
For repair or warranty information, please contact Ultratec Inc. Customer Service at (608)
This equipment cannot be used on public coin phone service provided by the telephone company. Connection to party line service is subject to state tariffs.
If the Miniprint 425 causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice is not practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
Occasionally, your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the operation of your equipment. If so, you will be given advance notice of the change to give you an opportunity to maintain uninterrupted service.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of the Miniprint 425 does not disable it. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
Other than replacing the batteries, the Miniprint 425 does not have any
3 8 • S P E C I F I C A T I O N S
