Turning on auto-answer | Ultratec Miniprint 425 instruction

Turning on auto-answer

Press the auto-answer key

(hold down the	Ctrl key
and press the 4	key).

Turning off auto-answer

To turn off auto-answer, press the Esc Miniprint 425.

key or turn off the

Interrupting auto-answer

If you see the Miniprint 425 sending your answer memo or receiving a message and you want to answer the call yourself, press the Esc key and start typing.Auto-answer will go off and you will be in conversation mode.

Setting the number of telephone rings

You can set the Miniprint 425 so that it waits between 2 and 9 rings before answering. Follow these steps to change the number of rings:

1.Press the options key ( Ctrl + 3 ).You will see PRINT (UP/LOW) CASE on the display.

2.Press the Return key until the display says AUTO ANSWER RING (2).The default setting is 2.

3.Press the

4.Press the

Spacebar to choose a number between 2 and 9.

Esc key to save the setting and leave options.

2 4 • A U T O - A N S W E R

Image 26

Ultratec Miniprint 425 manual Turning on auto-answer, Interrupting auto-answer, Setting the number of telephone rings

Contents

Using Your Miniprint Acknowledgement Ultratec, Inc Science Drive Madison, WI Contents Sticky keys Specifications Index Conversation Etiquette Important safety instructions General safety Battery safety Introduction Dial key Overview of the Miniprint Special keys 1SETUP Plugging in power and the telephone line Charging the batteries Setting pulse or tone dialingConnecting a signaler or telephone What kind of telephone line? About Auto ID About the printer Setting the print case Setting the print size E T U P 2CALLING Making a call in direct connect Signal light and display Dialing tips Answering a call in direct connect Acoustic calling and answering Using Turbo Code interrupt About Turbo Code Wait for response Change to other TTY Three-way calling Type NAME, NUM, or CR Transferring a call A L L I N G 3AUTO-ANSWER Interrupting auto-answer Setting the number of telephone ringsTurning on auto-answer 4OPTIONS Setting the print caseSetting the print size Turning off Turbo Code Setting pulse/tone dialingSetting the number of auto-answer rings Turning off Auto ID Turning off interrupt Setting the Baudot code baud rate 5CARE & Repair Replacing the printer paper Exercising the batteries About the batteriesChecking the batteries Replacing the batteries Poor reception TroubleshootingDirect connect Power Printer Calling for help Resetting the MiniprintRepair Sending in the Miniprint 425 for repair Sticky Keys Specifications Power FCC information Technician for help Industry Canada information Index Auto-answer D E X 4 Conversation Etiquette GA or SK