Ultratec Miniprint 425 STICKY KEYS

STICKY KEYS

Ordinarily,when you use the or keys,you must hold

down either key while you press another key.If you have

trouble pressing two keys at once,the sticky keys feature lets

you use the and keys by pressing one key at a time.

To turn on sticky keys,press either key five times.The

display says STICKY KEYS ON.

Now you can type a $ by pressing and releasing the key,

then pressing and releasing the key.

When sticky keys is on,you can also lock down the key

or a key so that it affects every other key until you

unlock it.To lock the key or a key,press the key

twice.To unlock the key,press it once more.

Press either key five more times to turn off sticky keys.

The display says STICKY KEYS OFF.

If you use sticky keys all the time,you do not have to turn it

on each time you turn on the Miniprint 425.After you turn on

the sticky keys feature,it stays on until you turn it off or reset

the machine.

Shift

ShiftCtrl

Shift

Ctrl

Shift

ShiftCtrl

36 • STICKY KEYS

Contents

Main Acknowledgement CONTENTS Important safety instructions p. 3 Introduction p. 5 Page Important safety instructions Save these instructions! General safety Battery safety INTRODUCTION Special keys Overview of the Miniprint 425 1 Plugging in power and the telephone line Charging the batteries What kind of telephone line? Setting pulse or tone dialing Connecting a signaler or telephone About Auto ID About the printer Setting the print case Setting the print size Page 2 Making a call in direct connect Signal light and display Dialing tips Using a telephone to dial Answering a call in direct connect Acoustic calling and answering About Turbo Code Using Turbo Code interrupt Wait for response Change to other TTY Three-way calling Transferring a call Page 3 Turning on auto-answer Turning off auto-answer Interrupting auto-answer Setting the number of telephone rings 4 Setting the print case Setting the print size Setting pulse/tone dialing Setting the number of auto-answer rings Turning off Turbo Code Turning off Auto ID Turning off interrupt Setting the Baudot code baud rate 5 Replacing the printer paper About the batteries Checking the batteries Exercising the batteries Replacing the batteries Troubleshooting Direct connect Poor reception Printer Power Resetting the Miniprint 425 Repair Calling for help Sending in the Miniprint 425 for repair STICKY KEYS SPECIFICATIONS SPECIFICATIONS 37 FCC information 38 SPECIFICATIONS SPECIFICATIONS 39 Industry Canada information INDEX 40 INDEX INDEX 41 Conversation Etiquette