Setting the print case
The Miniprint 425 prints everything you type in lowercase (small) letters and everything the other person types in uppercase (CAPITAL) letters.You can also set the Miniprint 425 so that everything is printed in uppercase letters. Follow these steps to change the print case:
1.Press the options key ( (UP/LOW) CASE.
Ctrl
+
3
).The display says PRINT
2.Press the
3.Press the options.
Spacebar to change the setting to UPPER.
Esc key to save the setting and leave the
This option stays changed until you change it again or completely reset the Miniprint 425.
Setting the print size
Your Miniprint 425 is set to print 24 characters on each line (normal).You can change this setting and print 19 characters (bold) or 14 characters (wide) per line. Follow these steps to change the print size:
1.Press the options key ( Ctrl + 3 ).
2.Press the Return key until you see PRINT SIZE (NORMAL) on the display.
3.Press the
4.Press the
Spacebar to change the setting to BOLD or WIDE.
Esc key to leave the options.
The print size stays set until you change it again or reset the Miniprint 425.
S E T U P • 1 1
