Konica Minolta Z20 instruction manual Setting the Date and Time

DiMAGE_Z20_English_B412.qxd 04.12.27 16:51 Page 18

SETTING THE DATE AND TIME

	After initially inserting batteries, the camera’s clock
	and calendar must be set. When images are
1	recorded, the image data is saved with the date and
	time of recording.
	If the clock and calendar have not been set, a
	message is displayed for a few seconds each time

the camera is turned on. This message is also displayed if the clock and calendar are reset when the camera is stored without batteries for a long period.

Set date/time?
Yes	No

Use the left and right keys of the controller (1) to select “Yes.” “No” cancels the operation.

Press the center of the controller to open the date/time setup screen.

Date/Time set

2005 . 01 . 01 00 : 00

MM / DD / YYYY

:move :sel. :enter

Date/Time setup screen

Use the left and right keys to select the item to be changed.

Use the up and down keys to adjust the item.

Press the central button to set the clock and calendar.

The date/time setup screen can be opened in section 2 of the setup menu.

18GETTING UP AND RUNNING