Konica Minolta Z20 instruction manual + Button, Adjusting Monitor Brightness

DiMAGE_Z20_English_B412.qxd 04.12.27 16:52 Page 28

i+ BUTTON

Pressing the information (i+) button changes the monitor display. The display cycles among the standard display, real-time histogram, and live image only.

Standard display	Real-time histogram Live image only
The real-time histogram shows the approximate
luminance distribution of the live image. This
histogram cannot show the affect of flash illumination.
The histogram of a recorded image may not show the		Information button
same distribution as the real-time histogram.

ADJUSTING MONITOR BRIGHTNESS

The monitor image can be made lighter or darker. The brightness level can be set individually for viewfinder and direct viewing. Turn the mode switch to the appropriate position. Press and hold the information (i+) button to open the LCD brightness screen.

Use the left/right keys of the controller to adjust the brightness; the monitor image changes accordingly. Press the center of the controller or the menu button to set the brightness level.

28BASIC RECORDING

Set LCD brightness

Low High

:adjust :enter