Konica Minolta Z20 instruction manual Viewing Images on a Television

DiMAGE_Z20_English_B412.qxd 04.12.27 16:57 Page 84

VIEWING IMAGES ON A TELEVISION

It is possible to view camera images on your television. The camera has a video-out terminal to make the connection using the supplied Video cable VC-400. The camera is compatible with the NTSC and PAL standards. The video-output setting can be checked and set in section 4 of the setup menu (p. 96). To view images recorded in the internal memory, remove the memory card from the camera.

1.Turn off the television and the camera.

2.Insert the small plug of the video cable into the camera’s video-out terminal. The arrow mark on the plug should face the back of the camera.

3.Plug the other end of the video cable into the video

input terminal on the television.

4.Turn the television on.

2

5.Change the television to the video channel.

6.Turn the camera’s mode dial to the playback position and turn on the camera. The camera’s monitors will not activate when the camera is attached to a television. The playback-mode display will be visible on the television screen.

7.View images as described in the playback section.

84ADVANCED PLAYBACK