Konica Minolta Z20 instruction manual Custom White Balance

DiMAGE_Z20_English_B412.qxd 04.12.27 16:52 Page 56

Custom White Balance

Custom white-balance allows the camera to be calibrated to a specific lighting condition. The setting can be used repeatedly until reset. Custom white balance is especially useful with mixed-lighting or when critical control over color is needed. The object used to make a calibration must be neutral. A blank piece of white paper is an ideal surface and can easily be carried in a camera bag.

To calibrate the camera, select custom setup
(Cust.set) from the white balance option in section 1	Drive mode
of the movie, and P, A, S, and M exposure-mode	Image size		Cust.set
menus (p. 44); the custom white-balance calibration	Quality		CustRecall
screen opens.
	White balance		Auto
Fill the image area with a white object; the object	Key func.		Preset
does not need to be in focus. Press the central
button of the controller to make the calibration or
press the menu button to cancel the routine.
The live view shows the effect of the new white
balance setting. The custom setting will remain in
effect until another calibration is made or the white-
balance setting is changed.			:enter
If the custom white-balance setting is required again, select
custom recall from the white-balance option of the menu; the		Drive mode
last custom white-balance setting will be applied	to the
		Image size		Cust.set
camera. The same custom white-balance setting is made
		Quality		CustRecall
and accessed from the movie, P, A, S, and M exposure
modes.		White balance		Auto
			Key func.	Preset

56ADVANCED RECORDING