Konica Minolta Z20 instruction manual Full-Time Af, Flash Mode, Flash Compensation

DiMAGE_Z20_English_B412.qxd 04.12.27 16:52 Page 57

FULL-TIME AF

With full-time AF active, the autofocus systems continually focuses to keep the monitor image sharp. This also reduces the autofocusing time when taking pictures. When the camera is set to manual focus, full-time AF is disabled. Turning the full-time AF function off can help conserve battery power. Full-time AF can be turned on and off in section 2 of the P, A, S, and M menus (p. 44).

FLASH MODE

The flash modes can be changed in section 2 of the P, A, S, and M menus (p. 44). This menu option is used when another function is assigned to the flash mode button, see page 62 on the custom key function. For more on flash modes, refer to page 26.

Focus mode	Single AF
Full-time AF	On
Flash mode	Autoflash
Flash comp.	0
Metering mode	MultiSegment

FLASH COMPENSATION

Flash compensation increases or decreases the flash exposure of the built-in flash in reference to the ambient exposure by as much as 2 Ev.

Select the flash compensation option section 2 of the P, A, S, and M menus (p. 44). Use the up/down keys to adjust the degree of compensation (1). Press the central controller button to set this value (2). If any value other than 0.0 is set, an indicator will be displayed on the monitor as a warning.

Focus mode
Full-time AF
Flash mode	–2 ~ +2
Flash comp.	+0.3
Metering mode

Positive compensation No compensation Negative compensation No flash

57