Konica Minolta Z20 instruction manual Print size Printer setup Layout

DiMAGE_Z20_English_B412.qxd 04.12.27 16:57 Page 109

	7
No. of prints:
Print size:	Printer setup
Layout:	Printer setup
Print quality:	Printer setup
Data print:	Printer setup
:Start

The number of prints in the print run are displayed as well as the print parameters selected with the menu. See the menu navigation section for more information (p. 110). Press the central button of the controller to begin printing, or press the menu button to return to the PictBridge screen.

Printing finished.

Once printing begins, the operation can be canceled by pressing	OK
the center of the controller. The printing-finished message
indicates the end of the operation; turn the camera off to end the
routine.

NOTES ON PRINTING ERRORS

If the battery is exhausted before the print run is complete, printing is canceled. Use a fully-charged battery or the optional AC adapter.

If a minor problem occurs during printing, such as the paper runs out, follow the procedure recommended for the printer; no action is required for the camera. If a major printer error occurs, press the center of the controller to end the routine. Refer to the printer manual for the correct procedure for the printer problem. Check the printer settings before starting again and deselect the images that were printed.

109